This F#*king horn!

Pete_89T2 · 01-16-2011, 08:11 AM

Sounds like the solder joints to the connectors on the CPU board are causing the open circuit. Just like the HVAC/logicon/clock & idiot light cluster on FCs, the solder joints like to crap out on these too. If you're handy with a soldering iron, pull out the CPU, open it up and re-do all the solder joints where the connectors join the circuit board. Pop it back in and see if it solves your problem.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

01-16-2011, 08:11 AM	#3
Pete_89T2 Lifetime Rotorhead Join Date: Apr 2010 Location: Elkton, MD Posts: 874 Rep Power: 16	Sounds like the solder joints to the connectors on the CPU board are causing the open circuit. Just like the HVAC/logicon/clock & idiot light cluster on FCs, the solder joints like to crap out on these too. If you're handy with a soldering iron, pull out the CPU, open it up and re-do all the solder joints where the connectors join the circuit board. Pop it back in and see if it solves your problem.