Plain Jane OEM nothing to see here rebuild

Pete_89T2 · 11-22-2011, 09:02 PM

Definitely replace that master cylinder, any leaks there result in no brakes.

On the fan wiring, is it still per the schematic diagram on post #112? Is it blowing those 40A fuses when turned on with the switch, or is it just not running repeatably when you flip the switch on/off? If it's the latter, first thing to check is the wiring & grounds - may have a loose intermittent connection somewhere, or its also possible the relay contacts may be going bad (carbon arcing). If it is blowing that 40A fuse, you've got a short circuit to find.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

11-22-2011, 09:02 PM	#11
Pete_89T2 Lifetime Rotorhead Join Date: Apr 2010 Location: Elkton, MD Posts: 874 Rep Power: 16	Definitely replace that master cylinder, any leaks there result in no brakes. On the fan wiring, is it still per the schematic diagram on post #112? Is it blowing those 40A fuses when turned on with the switch, or is it just not running repeatably when you flip the switch on/off? If it's the latter, first thing to check is the wiring & grounds - may have a loose intermittent connection somewhere, or its also possible the relay contacts may be going bad (carbon arcing). If it is blowing that 40A fuse, you've got a short circuit to find.