AZRR CYM FD Build Coming Together

[RCCAZ 1]

Originally Posted by Monkman33

Fill method for the tank?

Here's a sketch of what I'm envisioning. Tank will use the stock windshield washer fill hole on the rear panel.

[GorillaRE]

Originally Posted by RCCAZ 1

Here's a sketch of what I'm envisioning. Tank will use the stock windshield washer fill hole on the rear panel.

I would place a "baffle wall" with 1/8" holes near the bottom, around the pump supply line on the drivers side tank. Splitting the tank into two tanks was good idea and WILL assist in the "slosh" effect. None the less, I would recommend you add the baffling.

-J

[RCCAZ 1]

Originally Posted by GorillaRE

I would place a "baffle wall" with 1/8" holes near the bottom, around the pump supply line on the drivers side tank. Splitting the tank into two tanks was good idea and WILL assist in the "slosh" effect. None the less, I would recommend you add the baffling.

-J

Agreed. Baffles are part of the plan. I'll keep posting up pics as the tank takes shape!

[REVIT93RX7]

Who was the maker of your rear diffuser. Great build by the way.

[RCCAZ 1]

Originally Posted by REVIT93RX7

Who was the maker of your rear diffuser. Great build by the way.

Diffuser is the SHINEAUTO Amemiya Street Diffuser. Thanks for the props!

[RCCAZ 1]

Latest updates. WI tank fabrication and install completed!









2 in 1 Diff brace purchased and installed as well as Banzai Racing tranny brace and mount!!