Aluminum Manual Steering Rack w/ quick ratio steering box

MotoTek · 02-20-2009, 04:16 PM

Looks like we got the 5 we need. I'll leave the last person unnamed until he makes his mind up for sure, but we should be set to go.

I'll be pming each of you shortly for more contact info. He's going to contact you guys each individually to make it easier on his end.

Also, I asked for the zip codes because I wanted to see if one of us was at a central place to ship to first, and then from there to the other states, so we can split the import duties if they are expensive.

If wanted, I'll see if my dad feels like taking care of getting the stuff shipped to him first in Pittsburgh, PA then off to us after that. I'm in California, so coming to me first would be dumb, since the rest of you are on the East coast.

Also, he's asking for a 50% deposit, so we're looking at $450 up front. I'm sure he can answer any other questions you guys have along the lines of payment, since I have nothing to do with that. Just trying to hook us all up with some nice parts w/ a discount.

-mike

gmonsen · 02-20-2009, 08:09 PM

I bought the first LHD rack and had to send Jon my rack to be sure the alignment was correct, since the RHD version has to clear a different set of obstacles. Its a beautiful piece. Jon will be over here for the CARLISI CRUISE & BBQ event at my place this August 15th. He's bringing a few of his beautiful billet 6 pot big brake kits in 13 and 14 inch diameters. These are as nicely made as the rack.

Gordon

To_Slow · 03-03-2009, 08:58 AM

1. MotoTek
2. To_Slow(LHD) (zip 48316) Deposit sent for solid mount rack

3. Trout2 (LHD) (zip 70118)
4. traynham (LHD - zip: 28804)
5.

MotoTek · 03-12-2009, 07:56 PM

Guys, shipping to Gordons I thought was a great idea, but Jon says that shipping is dependent on weight.

So, shipping all the racks to Gordons would just be 4x as much, then we'd have to pay shipping from his place to ours. We'll all have to pay a little bit more in taxes this way, but it will save us/gordon hassle and time.

1. MotoTek Paid in full

2. To_Slow(LHD) (zip 48316) Deposit sent for solid mount rack

3. Trout2 (LHD) (zip 70118)
4. traynham (LHD - zip: 28804)

lt1_fd3s · 03-23-2009, 11:11 AM

1. MotoTek Paid in full

2. To_Slow(LHD) (zip 48316) Deposit sent for solid mount rack

3. Trout2 (LHD) (zip 70118)
4. traynham Paid in full

mean to update last week when i became PIF...

and anyone else talked with Jon and know any updates?

zonblitz · 03-23-2009, 02:37 PM

I love this peice, I've been considering dumping the PS. I can't commit yet but by DGRR I should know for sure.

Trout2 · 03-23-2009, 04:37 PM

Quote:

Originally Posted by traynham

1. MotoTek Paid in full

2. To_Slow(LHD) (zip 48316) Deposit sent for solid mount rack

3. Trout2 (LHD) (zip 70118)
4. traynham Paid in full

mean to update last week when i became PIF...

and anyone else talked with Jon and know any updates?

I spoke with Jon two weeks ago to give him my CC for deposit. No news at that time.

Jack

02-20-2009, 04:16 PM	#1
MotoTek Always Under Construction Join Date: Mar 2008 Location: La Playa, CA Posts: 302 Rep Power: 18	Looks like we got the 5 we need. I'll leave the last person unnamed until he makes his mind up for sure, but we should be set to go. I'll be pming each of you shortly for more contact info. He's going to contact you guys each individually to make it easier on his end. Also, I asked for the zip codes because I wanted to see if one of us was at a central place to ship to first, and then from there to the other states, so we can split the import duties if they are expensive. If wanted, I'll see if my dad feels like taking care of getting the stuff shipped to him first in Pittsburgh, PA then off to us after that. I'm in California, so coming to me first would be dumb, since the rest of you are on the East coast. Also, he's asking for a 50% deposit, so we're looking at $450 up front. I'm sure he can answer any other questions you guys have along the lines of payment, since I have nothing to do with that. Just trying to hook us all up with some nice parts w/ a discount. -mike __________________ BLACKADDE™ \| ADGT RX7 \| Last edited by MotoTek; 02-20-2009 at 04:47 PM.

03-03-2009, 08:58 AM	#3
To_Slow Rotary Fanatic Join Date: Feb 2008 Location: Shelby Twp MI. Posts: 315 Rep Power: 18	1. MotoTek 2. To_Slow(LHD) (zip 48316) Deposit sent for solid mount rack 3. Trout2 (LHD) (zip 70118) 4. traynham (LHD - zip: 28804) 5. __________________ My link

03-12-2009, 07:56 PM	#4
MotoTek Always Under Construction Join Date: Mar 2008 Location: La Playa, CA Posts: 302 Rep Power: 18	Guys, shipping to Gordons I thought was a great idea, but Jon says that shipping is dependent on weight. So, shipping all the racks to Gordons would just be 4x as much, then we'd have to pay shipping from his place to ours. We'll all have to pay a little bit more in taxes this way, but it will save us/gordon hassle and time. 1. MotoTek Paid in full 2. To_Slow(LHD) (zip 48316) Deposit sent for solid mount rack 3. Trout2 (LHD) (zip 70118) 4. traynham (LHD - zip: 28804) __________________ BLACKADDE™ \| ADGT RX7 \| Last edited by MotoTek; 03-12-2009 at 08:01 PM.

03-23-2009, 11:11 AM	#5
lt1_fd3s WNC Tour Guide Join Date: Feb 2008 Location: WNC Posts: 780 Rep Power: 18	1. MotoTek Paid in full 2. To_Slow(LHD) (zip 48316) Deposit sent for solid mount rack 3. Trout2 (LHD) (zip 70118) 4. traynham Paid in full mean to update last week when i became PIF... and anyone else talked with Jon and know any updates? __________________ WNC Tour Guide - Including the Tail of the Dragon - PM for details

03-23-2009, 02:37 PM	#6
zonblitz Rotary Fanatic Join Date: Feb 2008 Location: Pearl River, LA Posts: 166 Rep Power: 18	I love this peice, I've been considering dumping the PS. I can't commit yet but by DGRR I should know for sure. __________________ Kenny If you need a website, or know anyone who does, look me up: www.efiniconsulting.com

02-20-2009, 08:09 PM	#2
gmonsen The Ancient One Join Date: Mar 2008 Location: Eastern Pennsylvania Posts: 144 Rep Power: 18	I bought the first LHD rack and had to send Jon my rack to be sure the alignment was correct, since the RHD version has to clear a different set of obstacles. Its a beautiful piece. Jon will be over here for the CARLISI CRUISE & BBQ event at my place this August 15th. He's bringing a few of his beautiful billet 6 pot big brake kits in 13 and 14 inch diameters. These are as nicely made as the rack. Gordon

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode