Rota Wheels..

Black91n/a · 04-06-2009, 11:42 PM

The relevant section (9.1.3.D.8.a):

"Fenders and wheel openings shall remain unmodified. It is permitted to roll under or flatten any interior lip on the wheel opening for tire clearance. Cars with plastic/composite fenders may remove any interior wheel opening lip, but the resulting material edge shall be no thinner than the basic fender material thickness. Non-metallic inner fender liners may be removed."

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

04-06-2009, 11:42 PM	#1
Black91n/a Rotary Fan in Training Join Date: Mar 2009 Posts: 39 Rep Power: 0	The relevant section (9.1.3.D.8.a): "Fenders and wheel openings shall remain unmodified. It is permitted to roll under or flatten any interior lip on the wheel opening for tire clearance. Cars with plastic/composite fenders may remove any interior wheel opening lip, but the resulting material edge shall be no thinner than the basic fender material thickness. Non-metallic inner fender liners may be removed."