pressurizing to test for leaks...?

misterstyx69 · 08-20-2009, 09:37 PM

www.fighters-garage.com Take a look at the Fighters Products.they have a pressure tester..Copy it..simple thing..I used a POOL gauge and a Tire valve on a PVC Cap(2 inch).I put it on a end piece so it would be longer and you could get a clamp on it.
Fill the system with air and watch the gauge.Look/feel for leaks.It allows you to actually walk around the engine IF the air isn't leaking out as fast as you put it in!

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

08-20-2009, 09:37 PM	#1
misterstyx69 .drives like MrMagoo! Join Date: Feb 2008 Location: Smiths Falls,Ontario Posts: 198 Rep Power: 18	www.fighters-garage.com Take a look at the Fighters Products.they have a pressure tester..Copy it..simple thing..I used a POOL gauge and a Tire valve on a PVC Cap(2 inch).I put it on a end piece so it would be longer and you could get a clamp on it. Fill the system with air and watch the gauge.Look/feel for leaks.It allows you to actually walk around the engine IF the air isn't leaking out as fast as you put it in!