|
|||||||
| RX-7 3rd Gen Specific (1993-2002) RX-7 1993-2002 Discussion including performance modifications and Technical Support Sections. |
|
|
Thread Tools | Display Modes |
|
|
#4 |
|
Rotary Fanatic
Join Date: Mar 2008
Location: Brenham, TX
Posts: 335
Rep Power: 18 ![]() |
Yeah thats pretty conservative timing, could try a bit more and see if the power keeps going up. Once the torque stops increasing, or drops off then back it off slightly.
. You will always have the difference in chamber temps. The rear always seems to run a bit hotter. It seems regardless of the setup and changes people try, the difference is always there. My only theory is the water cools the front first and can't cool the rear as effectively, heat is more retained in the rear hense the temp differences.
__________________
500+ HP thanks to: ![]() Fast reacting IAT sensor thread! Mechanical Pre-turbo Water Injection Thread Dual Stock fuel pumps Thread T2 differential swap! |
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|