injectors

dudemaaan · 10-07-2009, 05:52 PM

He could always put 12 v on the leads and listen for a click. They may need cleaned, I've cleaned injectors by soaking them in a plastic bag filled with carb cleaner overnight , then installing them in a fuel rail filled with carb cleaner, pressurizing the inlet and blocking the outlet and then applying 12v to the injectors and pulsing them on and off. Worked really well for some injectors that had been sitting and were gummed up and stuck.

They could also be sent off and cleaned.

10-07-2009, 05:52 PM	#1
dudemaaan Rotary Fanatic Join Date: Mar 2008 Location: Brenham, TX Posts: 335 Rep Power: 18	He could always put 12 v on the leads and listen for a click. They may need cleaned, I've cleaned injectors by soaking them in a plastic bag filled with carb cleaner overnight , then installing them in a fuel rail filled with carb cleaner, pressurizing the inlet and blocking the outlet and then applying 12v to the injectors and pulsing them on and off. Worked really well for some injectors that had been sitting and were gummed up and stuck. They could also be sent off and cleaned. __________________ 500+ HP thanks to: Fast reacting IAT sensor thread! Mechanical Pre-turbo Water Injection Thread Dual Stock fuel pumps Thread T2 differential swap!

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode