Stalling when reaching boost or 0 vacuum - Page 2

LunchboxCritter · 04-19-2010, 10:03 AM

Update: I found an ecu. It's on it's way. I'll let you know if that fixes my problem. Thanks for all of your help.

Bigshanks2002 · 06-19-2010, 02:17 PM

my 91 JDM S5 is doing the same thing. it seems as though the secondary injectors might not be kicking on. The main realy switches power to the 2 primary and the two secondary injectors individually. You need to start the car and pick up the idle to about 3000rpms and listen with a stethoscope (or a long screw driver to your ear) to see if the secondary injectors are ticking.

RETed · 06-19-2010, 03:22 PM

Quote:

Originally Posted by Bigshanks2002

The main realy switches power to the 2 primary and the two secondary injectors individually.

Uh...no.

-Ted

LunchboxCritter · 06-22-2010, 09:55 AM

Quote:

Originally Posted by Bigshanks2002

my 91 JDM S5 is doing the same thing. it seems as though the secondary injectors might not be kicking on. The main realy switches power to the 2 primary and the two secondary injectors individually. You need to start the car and pick up the idle to about 3000rpms and listen with a stethoscope (or a long screw driver to your ear) to see if the secondary injectors are ticking.

That's not it, I figured out that I had the neutral switch wired up wrong. That was causing my problems.

I am now wondering if my chipped ecu wasn't in "limp" mode because of wiring mistake. If so, why would the N370 not have entered "limp" mode as well?

I'm considering throwing the n374(chipped) back in there and see what it will do now that the neutral switch is wired right.

LunchboxCritter · 04-22-2010, 07:31 PM

Update: Installed n370 ecu and now I've got boost. I have to get the idle adjusted right and I'll be in great shape. Thanks everyone for all of the help and suggestions.

MazdaMike · 04-24-2010, 07:50 PM

I would lean towards the ECU I would try a US spec turbo ECU.

LunchboxCritter · 05-11-2010, 10:27 AM

Update: I have installed an n370 usdm ecu. woo hoo car makes boost now.

Question: On the J-Spec fuel rails does the fuel flow go in the secondaries and return out the primary rail (opposite of usdm)? The primary rail on the j-spec doesn't have the pulsation damper like the usdm rail.

Gregory Casimir · 05-11-2010, 10:38 AM

the jspec ecu that you had, was it a chipped one?

LunchboxCritter · 05-11-2010, 10:44 AM

yes, the N374 is chipped with a speedlab performance chip

LunchboxCritter · 05-11-2010, 10:50 AM

Here is a picture of the fuel rails. Right now I have the primary going to the fuel filter and the secondary going to the return. I believe that is backwards for this j-spec setup. Could someone please clarify?

FerociousP · 05-11-2010, 11:32 AM

the regulator (top right with the vac hose) is at the end of the fuel loop. The return line should be coming off this and go back to the tank. If you have them hooked up wrong I doubt it run at all.. With that said, I'm pretty sure you have them hooked up correctly as long as you know which rail in the primary and which is the secondary.

LunchboxCritter · 05-11-2010, 12:02 PM

Secondary on the top, Primary on the bottom.

Thanks for the info. I'm relieved not to have to remove the UIM again.

Car runs okay, idles sort of funny. Clutch to the floor and it'll idle right around 1000rpm let off the clutch in neutral and it drops to around 750-1200 or so and just bounces between the two. TPS is set as close to 1.0 ohm as I could get it. BAC checked at 11.9 ohm (so I assume it's good).

LunchboxCritter · 05-11-2010, 12:10 PM

One more tech question. My speedo isn't working, I think it may be the speedo gear in the transmission. I have the NA one from my old set up. Will it work in the TII transmission with the rear end gears being different would it be at all accurate?

LunchboxCritter · 05-21-2010, 11:10 AM

That could be why I'm having problems getting it to idle correctly. Where should that side of the charcoal canister go, can it be vented to atmosphere?

Update: figured out I have my fuel lines routed behind my speedo cable, and it's causing it to pull off the back of the speedo. Going to reroute it back behind them and speedo problem will be fixed.

Ender · 05-21-2010, 03:48 PM

It's supposed to treat the fumes from the gas tank, and then I think it normally vents to the atmosphere anyway, but I think they sometimes clog, get too old, or do something wrong and make your car smell. So I said screw it and pulled my charcoal canister out completely.

04-19-2010, 10:03 AM	#1
LunchboxCritter Simply Rotarded Join Date: Jan 2009 Location: Florida Posts: 166 Rep Power: 17	Update: I found an ecu. It's on it's way. I'll let you know if that fixes my problem. Thanks for all of your help. __________________ LunchboxCritter - 91 NA to J-Spec TII - 88 FC Vert - 04 Rx8 Disclaimer: I am not a mechanic, and I did not sleep at a Holiday Inn. DO NOT TRY THIS AT HOME!!!

04-22-2010, 07:31 PM	#5
LunchboxCritter Simply Rotarded Join Date: Jan 2009 Location: Florida Posts: 166 Rep Power: 17	Update: Installed n370 ecu and now I've got boost. I have to get the idle adjusted right and I'll be in great shape. Thanks everyone for all of the help and suggestions. __________________ LunchboxCritter - 91 NA to J-Spec TII - 88 FC Vert - 04 Rx8 Disclaimer: I am not a mechanic, and I did not sleep at a Holiday Inn. DO NOT TRY THIS AT HOME!!!

04-24-2010, 07:50 PM	#6
MazdaMike S4 Owner Join Date: Jun 2008 Location: Tottenham, ON, Canada Posts: 48 Rep Power: 0	I would lean towards the ECU I would try a US spec turbo ECU. __________________ 1985 Mazda RX7 GSL 13B, Holley etc 1997 Mazda MX6 LS - DD lowered on 17s

05-11-2010, 10:27 AM	#7
LunchboxCritter Simply Rotarded Join Date: Jan 2009 Location: Florida Posts: 166 Rep Power: 17	Update: I have installed an n370 usdm ecu. woo hoo car makes boost now. Question: On the J-Spec fuel rails does the fuel flow go in the secondaries and return out the primary rail (opposite of usdm)? The primary rail on the j-spec doesn't have the pulsation damper like the usdm rail. __________________ LunchboxCritter - 91 NA to J-Spec TII - 88 FC Vert - 04 Rx8 Disclaimer: I am not a mechanic, and I did not sleep at a Holiday Inn. DO NOT TRY THIS AT HOME!!!

05-11-2010, 10:44 AM	#9
LunchboxCritter Simply Rotarded Join Date: Jan 2009 Location: Florida Posts: 166 Rep Power: 17	yes, the N374 is chipped with a speedlab performance chip __________________ LunchboxCritter - 91 NA to J-Spec TII - 88 FC Vert - 04 Rx8 Disclaimer: I am not a mechanic, and I did not sleep at a Holiday Inn. DO NOT TRY THIS AT HOME!!!

06-19-2010, 02:17 PM	#2
Bigshanks2002 The Newbie Join Date: Jun 2010 Posts: 3 Rep Power: 0	my 91 JDM S5 is doing the same thing. it seems as though the secondary injectors might not be kicking on. The main realy switches power to the 2 primary and the two secondary injectors individually. You need to start the car and pick up the idle to about 3000rpms and listen with a stethoscope (or a long screw driver to your ear) to see if the secondary injectors are ticking.

05-11-2010, 10:38 AM	#8
Gregory Casimir Rotary Fanatic Join Date: Jan 2010 Posts: 253 Rep Power: 16	the jspec ecu that you had, was it a chipped one?

05-11-2010, 10:50 AM	#10
LunchboxCritter Simply Rotarded Join Date: Jan 2009 Location: Florida Posts: 166 Rep Power: 17	Here is a picture of the fuel rails. Right now I have the primary going to the fuel filter and the secondary going to the return. I believe that is backwards for this j-spec setup. Could someone please clarify? __________________ LunchboxCritter - 91 NA to J-Spec TII - 88 FC Vert - 04 Rx8 Disclaimer: I am not a mechanic, and I did not sleep at a Holiday Inn. DO NOT TRY THIS AT HOME!!! Last edited by LunchboxCritter; 05-11-2010 at 10:56 AM.

05-11-2010, 11:32 AM	#11
FerociousP I-had-a-bad-experience... Join Date: Feb 2008 Location: M'boro Posts: 1,046 Rep Power: 19	the regulator (top right with the vac hose) is at the end of the fuel loop. The return line should be coming off this and go back to the tank. If you have them hooked up wrong I doubt it run at all.. With that said, I'm pretty sure you have them hooked up correctly as long as you know which rail in the primary and which is the secondary. __________________ '15 Juke Nismo '06 MX-5 GT SOLD '04 S Silver RX-8 GT Track Day Use SOLD '90 Black TII vert w/ Sprint RE stock port/turbo DD dyno (242.6whp@5500rpm @12psi 8psi@redline) and (250ftlbtq@4800rpm @13psi) SOLD '89 GTUs 6p TII SOLD, '87 sport SOLD, '79 SA stock SOLD '91 B2600i 4x4 w/ Rx-8 LSD SOLD

05-11-2010, 12:02 PM	#12
LunchboxCritter Simply Rotarded Join Date: Jan 2009 Location: Florida Posts: 166 Rep Power: 17	Secondary on the top, Primary on the bottom. Thanks for the info. I'm relieved not to have to remove the UIM again. Car runs okay, idles sort of funny. Clutch to the floor and it'll idle right around 1000rpm let off the clutch in neutral and it drops to around 750-1200 or so and just bounces between the two. TPS is set as close to 1.0 ohm as I could get it. BAC checked at 11.9 ohm (so I assume it's good). __________________ LunchboxCritter - 91 NA to J-Spec TII - 88 FC Vert - 04 Rx8 Disclaimer: I am not a mechanic, and I did not sleep at a Holiday Inn. DO NOT TRY THIS AT HOME!!!

05-11-2010, 12:10 PM	#13
LunchboxCritter Simply Rotarded Join Date: Jan 2009 Location: Florida Posts: 166 Rep Power: 17	One more tech question. My speedo isn't working, I think it may be the speedo gear in the transmission. I have the NA one from my old set up. Will it work in the TII transmission with the rear end gears being different would it be at all accurate? __________________ LunchboxCritter - 91 NA to J-Spec TII - 88 FC Vert - 04 Rx8 Disclaimer: I am not a mechanic, and I did not sleep at a Holiday Inn. DO NOT TRY THIS AT HOME!!!

05-21-2010, 11:10 AM	#14
LunchboxCritter Simply Rotarded Join Date: Jan 2009 Location: Florida Posts: 166 Rep Power: 17	That could be why I'm having problems getting it to idle correctly. Where should that side of the charcoal canister go, can it be vented to atmosphere? Update: figured out I have my fuel lines routed behind my speedo cable, and it's causing it to pull off the back of the speedo. Going to reroute it back behind them and speedo problem will be fixed. __________________ LunchboxCritter - 91 NA to J-Spec TII - 88 FC Vert - 04 Rx8 Disclaimer: I am not a mechanic, and I did not sleep at a Holiday Inn. DO NOT TRY THIS AT HOME!!! Last edited by LunchboxCritter; 05-21-2010 at 11:15 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode