|
The end is near :)
I have my 3bar sensor :) And I've also taken delivery of my new cooler happy chappy today http://i527.photobucket.com/albums/c...pse0bef198.jpg I will be offering these for sale once I've finished all testing this may take till later this year but I will keep peeps informed :) |
Tapped for the boost controller and water injection nozzle source and tank source
http://i527.photobucket.com/albums/c...ps493bf6bd.jpg http://i527.photobucket.com/albums/c...ps7b73bca4.jpg Intercooler is also hand made custom tanks to my spec and mounts to my spec http://i527.photobucket.com/albums/c...pse145fd1c.jpg http://i527.photobucket.com/albums/c...ps2947a272.jpg |
Cheers guys :)
Bracket made and tacked for now on the mock up this holds the water solenoid http://i527.photobucket.com/albums/c...ps5c5ed7f8.jpg Mock up of the intake http://i527.photobucket.com/albums/c...ps5e03895a.jpg |
|
Ok intercooler is now in place :)
Front mount for the intercooler http://i527.photobucket.com/albums/c...ps213dab61.jpg With the bonnet catch in place http://i527.photobucket.com/albums/c...ps713c7ff3.jpg Intercooler fitted http://i527.photobucket.com/albums/c...psf35f2bcc.jpg http://i527.photobucket.com/albums/c...psb859b81f.jpg Turbosmart Raceport best in the game topgear stockport dealer for the past 5 years http://i527.photobucket.com/albums/c...ps2bd0259c.jpg Brace fitted http://i527.photobucket.com/albums/c...ps4db949ad.jpg http://i527.photobucket.com/albums/c...ps0bb478e3.jpg Not much left to do now Refit rear interior Fit new relays for fuel pumps Finish intake pipe for turbo Clamps for boost hoses Ducting for cooler and bonnet Fit 3bar sensor Then mot and mapping Still need to buy Source 25ltrs of meth ideas people?? Aem coils some point maybe near my birthday :) |
Ok the intake pipe is finished :)
http://i527.photobucket.com/albums/c...psa7c39299.jpg And the water nozzle is sitting well http://i527.photobucket.com/albums/c...psae28edf0.jpg Have also fitted my bigger fuel pump relays as I didn't like the old ones I used no pics of this as its boring lol Left to do now Ducting New battery Hover and wash Mot tax And mapping |
Well tonight I got quite a lot done on the car
I've move the AST back to the front of the engine and fitted a new over flow tank below :) Also I managed to get the front floor back on :) http://i527.photobucket.com/albums/c...psd0adbc88.jpg I also managed to get some time in her tonight to start afr tuning so I can get to the mot station safely :) done a large chunk of the cruise area and some boost runs upto 8psi :) The turbo sound is awesome really is Then I cleaned and cleaned as I had a good friend coming round to take some photos for me and here they are http://i527.photobucket.com/albums/c...ps45762ed8.jpg http://i527.photobucket.com/albums/c...ps9f647f3e.jpg http://i527.photobucket.com/albums/c...ps2dad547d.jpg http://i527.photobucket.com/albums/c...ps0e48cb91.jpg http://i527.photobucket.com/albums/c...psc6fc0a28.jpg Photos taken by Chris Woollam photography |
I love the amount of detail you've put into this project. I would never have the patience to finish a project the right way like this lol. Fantastic work!
|
Car looks jizzfactor3000 good!
Is that an oil restrictor on the turbo inlet or is it just an adapter to the oil line off the turbo? Want some sound vids of it boosting up! :driving: |
Hi Pete
The feed is just a normal -4 an fitting Videos will be coming very soon :) Ps do you rate where I have my nozzle will be ok I've set the water to come in at 12psi to stop water collecting on the walls of the intake tube Regards Craig |
|
And this is the reason why the bumper is back off
This time I wanted to make a real duct for the v mount rad and cooler Here are a few progress photos from tonight http://i527.photobucket.com/albums/c...ps479758c1.jpg http://i527.photobucket.com/albums/c...psbae4679c.jpg http://i527.photobucket.com/albums/c...psbb3f446e.jpg |
Ok just pulled the duct out
http://i527.photobucket.com/albums/c...ps19a0ccf3.jpg http://i527.photobucket.com/albums/c...psce038161.jpg It's very light and I will still have to trim and cut the holes for the rad and cooler,I'm happy with the way it's turned out |
Honestly mate, hurry up and move to Australia!
You will make a killing here with your skills you are showing, and there is lots of drug proceeds that are laundered here so money is no object for lots of customers. UK and US are broke ass motherfuckers compared to us, you need to move and move now! :) |
| All times are GMT -5. The time now is 08:30 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Hosted by www.GotPlacement.com