Rotary Car Club
Page 10 of 12 « First 789 10 1112
Show 40 post(s) from this thread on one page

Rotary Car Club (https://rotarycarclub.com/index.php)
-   Group Buys (https://rotarycarclub.com/forumdisplay.php?f=193)
-   -   FD3S RX-7 Engine Mounted Oil Catch Tank GB (https://rotarycarclub.com/showthread.php?t=5727)

speedjunkie 02-14-2012 11:56 PM
^Good idea LOL!

silverfdturbo6port 02-15-2012 01:23 AM
Yea im in for sure for a vent tank. black line
Quote:
Originally Posted by afgmoto1978 (Post 182097)
Scrubolio and Jesse what color silicone vent line do you want? Blue, black or Red.

Chris RedR1 - Red
Astro - Black
AOC007 - Already have line, unless you need more. Also do you still want to use your existing vent line?
Rob - Custom

Silver if your serious about getting speak up. All the extra tanks will be getting blue line.

Fiercealien and Matt you will be getting clear hardline. Note I'm not sure what setup you will be running on oil metering pump side so you may need to come up with something custom on your end. Talk to Trout2 for advise, he's currently one of my premix tanks.

Adam

afgmoto1978 02-15-2012 09:45 AM
Eric I will be having some engine mount plates made soon, would you like one? Thinking stainless.

xenocide0 02-15-2012 02:51 PM
Quote:
Originally Posted by afgmoto1978 (Post 182097)
Fiercealien and Matt you will be getting clear hardline. Note I'm not sure what setup you will be running on oil metering pump side so you may need to come up with something custom on your end. Talk to Trout2 for advise, he's currently one of my premix tanks.
Adam
Yea, not sure what I will be doing yet either.

Quote:
Originally Posted by afgmoto1978 (Post 182123)
Also let me know if you have removed your stock Rats nest/coil mount framework from your motor.
still all stock, should I be doing this?

afgmoto1978 02-15-2012 06:20 PM
Your fine Matt, you just need to relocate your vacuum chamber if your still running sequential twins.

speedjunkie 02-16-2012 01:57 AM
Quote:
Originally Posted by afgmoto1978 (Post 182186)
Eric I will be having some engine mount plates made soon, would you like one? Thinking stainless.
Yeah I'd probably pick up one of those. The one I made is fairly sturdy I think but I know I'd like yours better lol. How much?

afgmoto1978 02-16-2012 04:15 PM
Okay, update, powder coating should be done by the time I get back in town next Thursday. I will be able to send the tanks out by Friday. Once I pay for the powder coating I split the cost five ways and each person a total $.

FierceAlien 02-16-2012 09:25 PM
Quote:
Originally Posted by afgmoto1978 (Post 182097)
Matt you will be getting clear hardline. Note I'm not sure what setup you will be running on oil metering pump side so you may need to come up with something custom on your end. Talk to Trout2 for advise, he's currently one of my premix tanks.

Adam

What do you mean about this? Im running the rotary aviation adapter plate for the OMP. I was just going to run a line from the tank into this adapter. Or is there more to the puzzle then this?

Thanks.

afgmoto1978 02-16-2012 10:37 PM
Quote:
Originally Posted by FierceAlien (Post 182506)
What do you mean about this? Im running the rotary aviation adapter plate for the OMP. I was just going to run a line from the tank into this adapter. Or is there more to the puzzle then this?

Thanks.
Well there are a couple options on oil injection. You have the rotary aviation setup and your good to go, what type of connect/adapter are you using? Or I can send you something that will work great. Is your rotary aviation adapter have a 1/4 NPT connection?

Note some people are modifying the stock unit to inject premix.

afgmoto1978 02-16-2012 11:18 PM
Quote:
Originally Posted by speedjunkie (Post 182348)
Yeah I'd probably pick up one of those. The one I made is fairly sturdy I think but I know I'd like yours better lol. How much?
Still waiting for a quote, I'll let you you guy know what it will be. I have a design that will work for the Xcessive LIM setup where the UIM is move forward a little bit. If your running the stock LIM let me know.

speedjunkie 02-16-2012 11:52 PM
^I am running the Xcessive LIM.

FierceAlien 02-17-2012 04:34 PM
Quote:
Originally Posted by afgmoto1978 (Post 182515)
Well there are a couple options on oil injection. You have the rotary aviation setup and your good to go, what type of connect/adapter are you using? Or I can send you something that will work great. Is your rotary aviation adapter have a 1/4 NPT connection?

Note some people are modifying the stock unit to inject premix.
I am not sure as to what nipple is on it. I did not measure it. I did not modify it when i picked it up. So what ever one comes with it from them, is what i have. If you can send/setup something that will make it s bit easier and nicer to connect, im all for it. I was just going to use a piece of hose from one to the other. ;)

afgmoto1978 02-19-2012 03:58 PM
It's a 1/4 NPT adaptor, I will send you something that will work great.

afgmoto1978 02-25-2012 12:50 PM
Quote:
Originally Posted by afgmoto1978 (Post 182461)
Okay, update, powder coating should be done by the time I get back in town next Thursday. I will be able to send the tanks out by Friday. Once I pay for the powder coating I split the cost five ways and each person a total $.
Sorry guys wasn't able to pick the tanks up this week, I will pick them up either Monday or Tuesday depending on if I can get off work early enough.

I will be sending the UIM/catch tank mount design to be laser cut so if you want one speak up. Rob, Eric are on the list.

Prodigy 02-25-2012 04:40 PM
Quote:
Originally Posted by afgmoto1978 (Post 182515)
Note some people are modifying the stock unit to inject premix.

Sorry for derail, any more info on this, or a link... It's the first I've heard of it...


J.


All times are GMT -5. The time now is 08:04 PM.
Page 10 of 12 « First 789 10 1112
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Hosted by www.GotPlacement.com