Sure, if I can get them out without breaking them. I'm still working bugs out of my rebuild and haven't touched the old engine yet.

rotating assembly
 

Interested in the rotating assembly if it is still servicable and within spec.
( e shaft , front / rear rotors and front / rear counterweights )

Let me know

Michael...

I tore down the engine yesterday. Still need to clean the parts.

Engine is in pieces. I haven't cleaned the parts yet or specced them. There were no failures on the engine before I pulled it....it was simply low on compression and power.

Irons seem to be good. Water jacket grooves are all in tact, no excess step wear
Rotors seem good, but I need to clean the carbon off
One housing seems good, one has flaking
All the bits and pieces look good (front counterweight, oil pump, chain, etc)

rotating assembly
 

great ...was it an auto or manual as i am after the auto model as it has the rear counterweight from factory...sorry should of mentioned that

Michael...

I figured that's part of what you were looking for. It was not an automatic. I can sell you the flywheel, but shipping to Australia will be expensive.

rotating assembly
 

Thanks for that jeff but need the auto version ....surely someone has one out there in good nick ..

Michael...

Miket

You still interested in the rotating assembly?

The rotors are in good shape, probably want to replace the bearings, but the rotors themselves are in great shape. Eshaft is in great shape also.
Can sell you the front counterweight also...and I have a friend with an automatic counterweight that he would sell you.

How much u want for the rotating assembly? Flywheel e-shaft , cw and the primary injector diffuser ?

Pics of the rotors. I started cleaning but my wire wheel needs replaced.

http://a4.sphotos.ak.fbcdn.net/hphot...24515221_n.jpg

http://hphotos-iad1.fbcdn.net/hphoto...81283563_n.jpg

http://a5.sphotos.ak.fbcdn.net/hphot...46852241_n.jpg

http://a3.sphotos.ak.fbcdn.net/hphot...73507489_n.jpg

http://a8.sphotos.ak.fbcdn.net/hphot...27736648_n.jpg

http://a4.sphotos.ak.fbcdn.net/hphot...36863748_n.jpg

http://a6.sphotos.ak.fbcdn.net/hphot...05279073_n.jpg

http://a7.sphotos.ak.fbcdn.net/hphot...17814456_n.jpg

http://a1.sphotos.ak.fbcdn.net/hphot...50783254_n.jpg

http://a3.sphotos.ak.fbcdn.net/hphot...41496532_n.jpg

http://a5.sphotos.ak.fbcdn.net/hphot...20157254_n.jpg

http://a6.sphotos.ak.fbcdn.net/hphot...68990133_n.jpg

http://a1.sphotos.ak.fbcdn.net/hphot...89036174_n.jpg

http://a7.sphotos.ak.fbcdn.net/hphot...31954866_n.jpg

Bearings do show some wear
http://a8.sphotos.ak.fbcdn.net/hphot...21452666_n.jpg

PM'ed...get back at me

pm sent.