Thanks man, just don't wanna run off new members :icon_tup:

S4TII swap not an option?

/\ You know, that is a good idea for someone who has been an owner for a while, and gotten to know what it's like to be a rotorhead, but maybe it isnt such a good idea for someone who's just jumping into it? I think that the TS will enjoy their N/A just fine, and after they get to know their car well, they can go turbo? A lot of people complain that the FC is slow, but after driving my moms huindai, any sportscar is fast! Also, my vert is faster than a friends auto 944! (althrough that's not saying much :D)

Personally, I am going the N/A route so I can learn how to drive and not kill myself in the process, :D

is there any difrences between the s4 and s5 short blocks good or bad
no motter what im going to use the 5 rotors for the higher comp
Race rotor bearings, 3 window bearings in stationary gears (would these come in the rebild kit normaly)
FD front oil pressure regulator spring, rear FD oil pressure regulator(will do)
Streetport(will do)
S5 NA Intake manifold (what would be the advantig over the s4)
6 port sleeves removed (um can some one explan this)
VDI wire open (can some one explane this)
RB Header to exhaust of your choice (i was looking at there rase vershin)
RTEK or some other sort of tuning tool (whats RTEK can you lenk me to info on this)
No need for an RX-8 E-Shaft in a mostly stock build (so no Rx8 E-shaft?)
aluminum flywheel
act street clutch (would like to pick up a used clutch and flywheel together for right know just a decent light weight flywheel and a up graded clutch ACT or exady dont want to spend 400 bucks thin tern around and end up swaping in a TII tranny and what not perfer git one cheep used but still in decent condshen no puck clutchs tho)



the rebild kit im looking at is a basic stock rebild kit and im opting for up graded springs i was told the up graded seal were to touf and could eat up the rotors or somthing like that hears the link to the kit im looking at
http://www.rotaryaviation.com/overhaul_kits.htm

this is not my first motor rebild altho this is my first rotary rebild

do you thank the stock injecters will be fine for this bild im hoping thay will be

as fare as suspension not a big thang right know but im looking i gess i eather want a full race coil over set up or a decent set of struts with a set of eibock pro kit and a caber caster kit

well, if you plan on acting crazy then yeah, start NA to prevent death and increase power later. If you can control urges to act silly then I don't see how a stock S4TII would be less safe than an NA. It's not about being fast or slow. It's about power-to-cost ratio for me.

the reson why im wanting a loger brake kit is becouse this car isnt just going to be a car i take out and joy ride in this car is going to be seeing Auto X corses and highway 421 and the dragen probly some to i would like to have that eatra little bit of braking power if at all posoble and i perfer using factry parts from outher cars becouse if somthing fucks up you can always go to advanc and have it in the next day but if i can up grade it i will mostlikly go with brembo rotors, hawk pads, and SB brake lines and call it a day

haha it take a lot to run me off figer he sed somthing about my horendes spelling or somthing lo o well lol all hes doin is :beatdeadhorse5: lol

it hurts.

Go out and drive the 7 first. GO find it's limitations and THEN spend money. You're doing it backwards.

well right know i dont want to git in to all that wiht the car and for the condishens the car is going to see to me a decent hi-comp N/A will do what i want i hope manly looking for decent low in power i know its a rotory but i dont want to sit thater coming out of a tern wating to a turbo to spool

haha 7 dont even tern over at the moment just shut off one day lol and wont tern over at all (i can tern it over by hand but starter ant doin shit + the lematachens on that motor would be very low clutch is shot and the motor had no power befor it shut off that day so lol)

for right know NA is ware i want to be at

I asked if it was an option and I have yet to experience the problem you're mentioning about lag. Ever. Maybe if you slap on a GT35 or something bigger.

Then why are you trying to waste money on big brake kits and stuff you don't need or EVEN KNOW it NEEDS?

cool. NA is just as fun.


FIXED your posts but DAMN! I can't do it again.


WTF is lematachens??????????????

Some input from my worthless mind.

With an N/A, you will come out of every corner waiting for a turbo to spool. Only it will never happen.

IMHO, deep groove race bearings aren't required at all. In fact, I wouldn't even change the exisiting bearings in your engine unless they are trash. For what you're doing, money could be better spent elsewhere (unless you require them due to damage)

Good luck with your build :)

ok sorry about the spelling but i ment limitations


iv had enuf cars in my life turo supercharged and NA what i want is a nice quic throtle respons that you dont really git with a turbo


i posted it up that i was looking for some info right know i would like to git one for the car trust me ill over drive those brakes the first time up highway 421 but no im not in a hurry for that the motor is the main thank im just looking for info

well the way iv alwasd looked at motors i want it to be reliable every thang from the race motors iv bilt to a frekin geo metro i freshend up lol id perfer replace the barings now will the motors going to gether thin latter down the road thus wear out any any thang else this motor is going to be driven hard people:driving:


thanks for yours and evry ones input