Rotary Car Club - shifter bushing "cup"...

Page 2 of 2

Show 40 post(s) from this thread on one page

Rotary Car Club (https://rotarycarclub.com/index.php)

- RX-7 2nd Gen Specific (1986-92) (https://rotarycarclub.com/forumdisplay.php?f=37)

- - shifter bushing "cup"... (https://rotarycarclub.com/showthread.php?t=4631)

djmtsu

10-28-2008 02:20 PM

Short shifter or Short Throw shifter Ted?

You know there is a difference, and need to be specific.

Also, all the points you make (other than the sequential set-up) can be traced back to driver error.

The point of a short throw shifter is not to shift faster, but lessen the distance the shifter needs to physically move to change gears.

RoughRex

10-29-2008 10:07 PM

Quote:

Originally Posted by Max777 (Post 54789)

Well, I would do that, but after talking with Justin Pawlak (Pro drifter who drives an FC3S) a short throw shifter seems to put more wear on the transmission, and seeing that I have 140K on mine, I dont want to risk it.

Also, just as a follow up on this, I found the bushing, a company called MMR makes it:

http://mmr-direct.com/catalog1/RX7FC/index.htm

Interesting, does anyone know if this bushing will fit in an S4 tranny? My Short throw rattles a bit and this would be a quick, painless fix.

Max777

10-29-2008 11:33 PM

as far as I know, that bushing is the same, because I just replaced bushings on my friends S4 and my S5, and the hole looked exactly the same down there.

All times are GMT -5. The time now is 05:33 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page