Rotary Car Club - Norwegian S4 Base TII

Rotary Car Club (https://rotarycarclub.com/index.php)

- Show your rotary car build up. (https://rotarycarclub.com/forumdisplay.php?f=66)

- - Norwegian S4 Base TII (https://rotarycarclub.com/showthread.php?t=10842)

Started figuring out how i want to mount my fmic, so stripped the front.

http://i71.photobucket.com/albums/i1...e/IMG_1653.jpg
http://i71.photobucket.com/albums/i1...e/IMG_1655.jpg

Shiny Greddy elbow :D, ashame it makes the rest of the engine bay look like shit :/
http://i71.photobucket.com/albums/i1...e/IMG_1651.jpg

New engine and transmission mounts, should be stiff enough :D

http://i71.photobucket.com/albums/i1...e/DSC_0299.jpg

Build plans for the T2 block:
S5 NA rotors.
lightweight flywheel and counterweight.
Semi PP S5 NA housings.
T2 streetported irons.
Custom sequensal ITB setup.
++ machining and high rpm modifications

I think i have decided on buying a Haltech sport 1000 to run it, since it seems like it's worth the extra money over the Sprint RE...

9.7 rotors are on their way.
Semi PP housing are ordered.

This engine probably will probably take a long time to finish building, so i plan on buying the ecu as soon as i can afford, so i can start learning how to use it on my stock S4NA engine

Bought a mc throttle setup, so i can start building a throttle setup for the Semi pp project.

http://images.motorcycleparts2u.com/...ottle-body.jpg

http://images.motorcycleparts2u.com/...tle-body-5.jpg

Mounted the S4 NA engine with headers only, and it works :D

http://www.youtube.com/watch?v=7J8Zk0KE6RI

Itb's arrived today, looks like they will be a perfect base for the semi pp itb setup :)
http://i71.photobucket.com/albums/i1...7/DSC_0396.jpg
http://i71.photobucket.com/albums/i1...7/DSC_0397.jpg

Removed secondary butterfly's
http://i71.photobucket.com/albums/i1...7/DSC_0398.jpg
Fuel railene kan taes av og snus om sånn jeg vil ha de.
http://i71.photobucket.com/albums/i1...7/DSC_0399.jpg

Started making a rear shelf to mount som speakers, and also hide the amplifier and some other stuff.

http://i71.photobucket.com/albums/i1...7/DSC_0402.jpg
http://i71.photobucket.com/albums/i1...7/DSC_0406.jpg

Damn it, one off the speakers fell of a table and broke :(

So i bought theese JBL P6560c 6,5" of a friend, never been used.
http://i71.photobucket.com/albums/i1...7/DSC_0412.jpg
http://i71.photobucket.com/albums/i1...7/DSC_0413.jpg

Got wheaterpacks and two bulkhead connectors today, still need wires and something to protect/hide the wires and then i can start rewiring the car.
http://i71.photobucket.com/albums/i1...44048290_o.jpg

Found this site today, with more or less all needed color combinations on the cables, so now i "just" need to blueprint all the colors, thickness and length of all the wiring, will try to get it so that i have the entire harness done before i start removing any of the old, to keep downtime to a minimum, i need to drive this car alot to make up for all the money and hours i'm dumping in to it :)

http://www.vehicle-wiring-products.e...ndardcable.php

Passed emissions wo it will be back on the road again next week when i get the plates :D

mounted the JBL speakers.
http://i71.photobucket.com/albums/i1...7/IMG_1719.jpg
http://i71.photobucket.com/albums/i1...7/IMG_1718.jpg

Made a new plug for the cd player, wheaterpacks RULE :D
http://i71.photobucket.com/albums/i1...7/IMG_1717.jpg

Oooh nice! Bet that setup will sound like a choir of angels.

Got some Zender Daytona 15*7,5 rim's cheap, going to get studded winter tires on them, cause i have 17" with 215/45 unstudded winter tyres now, wich are rather useless..

http://i71.photobucket.com/albums/i1...IMG_0971-1.jpg
http://i71.photobucket.com/albums/i1...7/IMG_0972.jpg

what size are your ITB's? and off of what?

Suzuki gsxr 1000, 42mm

Hi there, fellow Norwegian!

Nice project, keep it up! Any chance you might be attending meets down south during the year?

I doubt it, most likely can't afford it due to the engine build. So will probably just go to Sommertreff on ACR.

Ok =) Well, best of luck with your build, I'm subscribed.

Got the T2 engine up on the work bench and have begun tearing it down to the shortblock. Didn't get alot done, but it's a start atleast.

http://i1073.photobucket.com/albums/...n/IMG_1742.jpg
http://i1073.photobucket.com/albums/...n/IMG_1743.jpg
http://i1073.photobucket.com/albums/...n/IMG_1744.jpg

Finished the rear muffler, and put in a pipe silencer. So it's less noisy, wich means it's fun to drive long trips, not tiresome cause of the noise

Also i found the stock fuel pump in a parts pile and decided to use it and some other misc parts to make a parts cleaner.
http://i1073.photobucket.com/albums/...s/IMG_1759.jpg
http://i1073.photobucket.com/albums/...s/IMG_1760.jpg

Mocked up the engine with the semi pp housings, looking forward to getting the rebuild kit so i can reassemble the engine and get it in the car and have some fun with it.
http://i1073.photobucket.com/albums/...P/IMG_1757.jpg

jævlar, har de prøvd å kjøre motoren på spillolje eller?

Fått gjort rotorne nesten helt ferdig, har også gått over side sealsene.

Checked the sideseals, and all except one was good. And that is propably the reason the front iron might be a throw away now...
http://i1073.photobucket.com/albums/...p/IMG_1800.jpg

Rotors looked good, except for one rotorface, wich had rusted and had lot's of pits. So i guess that is also a nice paperweight...
http://i1073.photobucket.com/albums/...p/IMG_1799.jpg
http://i1073.photobucket.com/albums/...p/IMG_1798.jpg
http://i1073.photobucket.com/albums/...p/IMG_1797.jpg
http://i1073.photobucket.com/albums/...p/IMG_1796.jpg
http://i1073.photobucket.com/albums/...p/IMG_1795.jpg

So far i probably need a new front iron, new sideseals and a new rotor.
Will buy a dial indicator and check the irons properly next week.

Got a bit bored today, so i drew up more or less how i plan to do the itb setup.
2*42mm for the periphial ports and 2*42mm for the side ports.

http://i1073.photobucket.com/albums/...e/IMG_1817.jpg

Good work! I never thought of making my own muffler lol.

Quote:

Originally Posted by Pettersen (Post 195993)

Hood had the wrong color, so i just painted i matte black until i can afford to paint the entire car.

Cool, the fighter plane motif. Now you just have to mount .50s under the pop-ups and people cutting you off will no longer be a problem. I like the speaker surround, very clean, it looks factory.

Don't have that, only my G3, you think that would be good enough? :P

Just came back from the first track weekend of the season.

http://a3.sphotos.ak.fbcdn.net/hphot...42215869_n.jpg

Came in a bit to fast thru a chicane and lost control, vent sideways out of the track and turned the car on it's side, this was early on friday. Fixed what needed fixing and made a lexan window, so i drove the rest of friday, saturday and sunday, the damage is only cosmetic and the car is still going strong, just need some major bodywork...

Oh that sucks man. At least it's still drivable though.

I hope to get the majority of the bodywork sorted this weekend so i can start focusing on the semi pp build again, have all the parts for the shortblock, just need to get a new radiator and build a intake manifold.