Rotary Car Club - Norwegian S4 Base TII

Rotary Car Club (https://rotarycarclub.com/index.php)

- Show your rotary car build up. (https://rotarycarclub.com/forumdisplay.php?f=66)

- - Norwegian S4 Base TII (https://rotarycarclub.com/showthread.php?t=10842)

assuming this is map sensor and FCD, shouldn't the vacum pipe be connected somewhere?
http://i71.photobucket.com/albums/i1...k/IMG_1566.jpg

Anybody know what this green plug is for? the wire runs by a relay out to the headlight, but not shure where it actually end's up.
http://i71.photobucket.com/albums/i1...k/IMG_1564.jpg
http://i71.photobucket.com/albums/i1...k/IMG_1563.jpg
Anybody know what theese to are?
http://i71.photobucket.com/albums/i1...k/IMG_1556.jpg
http://i71.photobucket.com/albums/i1...k/IMG_1555.jpg
http://i71.photobucket.com/albums/i1...k/IMG_1558.jpg

New wires for 02 and water temp :)
http://i71.photobucket.com/albums/i1...k/IMG_1552.jpg

Did the TB mod :)
http://i71.photobucket.com/albums/i1...d/IMG_1574.jpg

Stuff that came off the tb.
http://i71.photobucket.com/albums/i1...d/IMG_1576.jpg

made some cover plates instead of using threaded plugs like the Fc3spro how to says. This way it's possible to return the tb to stock again.
http://i71.photobucket.com/albums/i1...d/IMG_1575.jpg
http://i71.photobucket.com/albums/i1...d/IMG_1573.jpg

Got my ebay intercooler piping kit today, quality seems to be ok, only thing that i can complain about is that the paintjob isn't the best i've ever seen, a bit of dust and scratches in the paint, but that can always be fixed later on, will probably scratch the paint more when i'm installing it anyway.

http://i71.photobucket.com/albums/i1...r/IMG_1585.jpg
http://i71.photobucket.com/albums/i1...r/IMG_1589.jpg

One week until trackweekend, and it turns out i have a oil leak, last time i changed the oil pan it didn't make a seal+ it looks like i have some other small leaks or sweatting that i need to tend to. I decided i need to take the engine out in order to get the leaks fixed properly, it's just to much oil slowly running down to the gasket surface, and im guessing that's the reason it leaks now.

http://i71.photobucket.com/albums/i1...1/IMG_1596.jpg

http://i71.photobucket.com/albums/i1...1/IMG_1597.jpg
http://i71.photobucket.com/albums/i1...1/IMG_1600.jpg
http://i71.photobucket.com/albums/i1...1/IMG_1601.jpg
http://i71.photobucket.com/albums/i1...1/IMG_1604.jpg

So i went to the track this weekend, went with a small oil leak, came home with a big oil leak and a blown turbo, only got about an hour or so out on the track, but all in all a good weekend, the three hour drive home with a blown turbo was a bit nerve wrecking tho.
Pictures will follow when i get them.

So i need a new turbo, i plan to run 0.5bar until i brake the NA transmission and then turn up to 1 bar when i change in the T2 trans i have in my basement. I need something that delivers boost earlier than 5000rpm, the xspower turbo the last owner put on the car didn't deliver 0.5 before that.

My car is streetported, external wastegate and has a T4 flange, any suggestions to wich turbo i should go with?

Bought some stuff :D, Rtek 2.1 and everything needed is on it's way, best i could afford right now.

Also i'm going to buy a used Garrett T66 AR.96 journal bearing and not watercooled, still it should perform better than the XSpower T70 AR1.05

Picked up the new turbo, a bit bigger than i first tought. Might need to go with 1600 sec and 720 pri...

http://i71.photobucket.com/albums/i1...s_img45579.jpg

Started figuring out how i want to mount my fmic, so stripped the front.

http://i71.photobucket.com/albums/i1...e/IMG_1653.jpg
http://i71.photobucket.com/albums/i1...e/IMG_1655.jpg

Shiny Greddy elbow :D, ashame it makes the rest of the engine bay look like shit :/
http://i71.photobucket.com/albums/i1...e/IMG_1651.jpg

New engine and transmission mounts, should be stiff enough :D

http://i71.photobucket.com/albums/i1...e/DSC_0299.jpg