damn im jealous. i wish i had the time and money to do all of that. maybe one day.

it looks awesome and i hope you are able to finish it up nicely

hey dave. i made it over here now.

Trust me I dont have alot of money... just currently fortunate to have some extra income.

wes.. glad to see u made it buddy!

OK so I got the rubbers out of the diff bushings today but I sill have to get the sleves out of the diff ends so I can add the mmr mounts..


anyways everyone likes fire right?

http://img.photobucket.com/albums/v8..._IMAGE_375.jpg
http://img.photobucket.com/albums/v8..._IMAGE_373.jpg
http://img.photobucket.com/albums/v8..._IMAGE_374.jpg
http://img.photobucket.com/albums/v8..._IMAGE_377.jpg
http://img.photobucket.com/albums/v8..._IMAGE_378.jpg
http://img.photobucket.com/albums/v8..._IMAGE_376.jpg

*dialing 911*

ok after taking a day off, I went back outside and with alot of hard work and about an hour of time I was able to get the shells out of the diff.

http://img.photobucket.com/albums/v8..._IMAGE_381.jpg
http://img.photobucket.com/albums/v8..._IMAGE_380.jpg


The pieces left (what a pain in the ass)
http://img.photobucket.com/albums/v8..._IMAGE_379.jpg

That's hella lot of work man. Good job and it's looking good

thank you very much... tonight I plan to clean up the diff, put in the new mmr bushings and then drain the diff.

after that I may light the rear subframe on fire to in order to get those bushings out. (then I am done with bushings YEAAA!)

Ok well I got half done tonight

I got the front struts all put together and mounted in the car, I got the rear struts all put together but of course not in the car until after I get the subframe in..

Tomorrow I will paint the rear diff, then push in the MMR bushings

pics:

the strut mount perches I needed and the rear mount assemblies:

http://img.photobucket.com/albums/v8..._IMAGE_386.jpg
http://img.photobucket.com/albums/v8..._IMAGE_385.jpg

struts all assembled
http://img.photobucket.com/albums/v8..._IMAGE_387.jpg

Front struts mounted in the car.
http://img.photobucket.com/albums/v8..._IMAGE_388.jpg

the only thing I got done today was to bolt the strut tops in the front down to the strut tower :)

Ok so today I went outside and installed the MMR bushings in the diff, painted the diff (black) and attempted to get the bushings out of the rear subframe..

PICS!!
http://img.photobucket.com/albums/v8..._IMAGE_394.jpg

http://img.photobucket.com/albums/v8..._IMAGE_393.jpg

http://img.photobucket.com/albums/v8..._IMAGE_396.jpg

OK.. its been a few days.. so now I have some updates..

First of I finally got the bushings out of the rear subframe.. (this was HELL)


Whats left of the bushings
http://img.photobucket.com/albums/v8..._IMAGE_416.jpg
http://img.photobucket.com/albums/v8..._IMAGE_415.jpg

The tool I had to buy
http://img.photobucket.com/albums/v8..._IMAGE_418.jpg

and then end result
http://img.photobucket.com/albums/v8..._IMAGE_417.jpg
http://img.photobucket.com/albums/v8..._IMAGE_414.jpg

If I have my way.. tomorrow I will clean up the subframe, paint the subframe, slam in the new bushings and then start putting the control arms, diff and other stuff back on it.


I also begun to pull the interior out.. I got the seats out, the rear carpet, all the rear plastic, the front pillars and door sills, the headliner is loose and I still need to remove the front carpet and dash.

I will get pics of the interior once it is all out..

Ok I got the MMR mounts in, painted the rear subframe black and then attached the control arms, trailing arms, and camber links

here is the pics.

Mounts in:
http://img.photobucket.com/albums/v8..._IMAGE_422.jpg
http://img.photobucket.com/albums/v8..._IMAGE_423.jpg

Subframe painted:
http://img.photobucket.com/albums/v8..._IMAGE_424.jpg

All together:
http://img.photobucket.com/albums/v8..._IMAGE_426.jpg

bad ass bout time now i wanna see it bolted in haha. part all the parts next to each other so we can see what it looks like together haha

well I till need my adjustable camber bar and my comp diff mount then I can get it up on the car and get the rear suspension on.

then I will buy my sway bars and adjustable end links

WOOT WOOT