Rotary Car Club

Rotary Car Club (https://rotarycarclub.com/index.php)
-   Drag Racing Time Slips... (https://rotarycarclub.com/forumdisplay.php?f=85)
-   -   The RCC Official 1/4 Mile ET List, all Gens/all cars (https://rotarycarclub.com/showthread.php?t=368)

P71 05-27-2008 09:14 PM

Great pass David, but we're only accepting slips from Feb 08 and newer (the start of RCC), so go out and run it again! You might be like zinx and set a new personal best while you're at it ;)

2713ddddavid 05-27-2008 09:53 PM

Quote:

Originally Posted by P71 (Post 26354)
Great pass David, but we're only accepting slips from Feb 08 and newer (the start of RCC), so go out and run it again! You might be like zinx and set a new personal best while you're at it ;)

Thanks for the "at a boy".
I chipped four out of six apex seals after that day and still put 275 RWHP down. I have the Dyno sheet to show it.
I just broke in a Kevin Landers rebuild and ported motor. Smoked a dual friction clutch on the second 5k launch.:(
Center Force is gonna make good on the warranty and let me pay the difference
between the Dual Friction and the DFX. After all I gave them my mods and they recommended the dual friction. I just spent the holiday reinstalling last years clutch......which is like an on / off switch. I hate it but at least I can drive my 7. I store the car in winter.

P71 05-27-2008 10:58 PM

Might want to look into RAM or McLeod. Centerforce's aren't doing so hot in the last 2 years...

When's your track opening?

AndreS 07-13-2008 02:41 AM

Finally made it out to the track last night! Pacific Raceways had a test & tune and some club event going on, I was able to make seven passes.

car: 1988 Mazda RX7 SE
Engine: 1999 Chevrolet LS1 5.7L (stock)
transmission: 4L60E (stage 2 Performabuilt), 3500 stall
Tires: Mickey Thompson ET drag 28x9-15, MT ET fronts 25x4.5-15
Mods: T2 diff, 5-lug swap, poly bushings, KYB AGX struts, 150# rear springs, Hurst Quarterstick shifter, shorty headers, X-pipe.



will post up a pic of the timeslip if you'd like later...

the best run, 12.113 @ 112.44, had my worst reaction time... best R/t was .170. I need to work on that.

r/t: .968
60': 1.669
330': 4.961
1/8: 7.725
mph: 88.6
1000': 10.109
1/4: 12.113
mph: 112.44

josh18_2k 07-13-2008 11:23 AM

you 4l60e guys are a bunch of cheaters! lol

P71 07-13-2008 11:34 AM

Holy hell that's AWESOME! Post the slip too for posterity and I'll get you all set in on the list ;)

Hey Josh, you need to come drag racing with me next weekend. I bet I can get your car faster... ;) :D

josh18_2k 07-13-2008 02:42 PM

dude if you wanna run my car go for it. i know im no good at drag..
however- next weekend is the packwood autox!! both sat and sun. why arent you going? :-(

P71 07-13-2008 10:47 PM

Not driving 3 hours there for 4 runs each day. I *might* do the ProSolo for the different format. Otherwise I'll keep showing up to the PIR/ORPCA events.

Rotorypolo 07-21-2008 02:51 PM

12.8 @ 111 mph. crappy 2.3 60 ft. 13 lbs on a hot day, stock seq. twins, street tires..

P71 07-21-2008 06:34 PM

Timeslips?

AndreS 07-26-2008 02:32 AM

I tried taking a pic of it but it doesn't show up, the #'s are all blurry.... F'n cheap camera.

P71 07-27-2008 04:21 PM

Use the "Macro" mode (should be like a little flower icon) for close ups. Get the clearest shot you can and type out all of the incremental times (60', 1/8, 1/4) and I'll add you on.

P71 08-09-2008 11:25 AM

Updated with AndreS time.

Where are the rest of you dang it?!!?

busted7 08-09-2008 10:36 PM

I have some events coming up and will try to get some vids and slips. Hope it stays in one piece.
Trying to beat 10.8 so if i do you will know ahead of time.If i dont youll not hear from me!

sk8world 08-12-2008 09:03 AM

Busted, so you ever run the 2nd gen with super charger?

Are you running the 3rd gen at the event on pump or race? Why chance it, C16 is your friend...


All times are GMT -5. The time now is 07:17 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Hosted by www.GotPlacement.com