Rotary Car Club - Craig's Project JDM FD3S UK Style

Rotary Car Club (https://rotarycarclub.com/index.php)

- RX-7 3rd Gen Specific (1993-2002) (https://rotarycarclub.com/forumdisplay.php?f=36)

- - Craig's Project JDM FD3S UK Style (https://rotarycarclub.com/showthread.php?t=15095)

Ok very productive day on the Rex

I've finished the fuel pot and the fitting of the bosh 044 and fuel filter. I've then twin lined upto the front rails

http://i527.photobucket.com/albums/c...t/d5a9fc69.jpg
Cable tie will be replaced Tuesday night with some nice Pclips :)

And I've also managed to sort the rail with -6an fittings

http://i527.photobucket.com/albums/c...t/f27ffcff.jpg

Onto the Intercooler fitting has gone ok most time was spent making up the ducting around the cooler

http://i527.photobucket.com/albums/c...t/4dbfd926.jpg

http://i527.photobucket.com/albums/c...t/84d15c03.jpg

http://i527.photobucket.com/albums/c...t/62d63eb4.jpg

http://i527.photobucket.com/albums/c...t/3e88ae14.jpg

Thought I would stick my BGW on I was going for a mad rear panel set up, which I'm putting on the back burner till I get my head around cad

http://i527.photobucket.com/albums/c...t/2fb96b0b.jpg

The finish line is near :) :)

She started like a dream and sounds great, really different to what it used to sound like on twins I LIKE IT :)

All I'm waiting on now is two 3" clamps for the elbow to bov tube

Some photos

http://i527.photobucket.com/albums/c...t/6d1a82f0.jpg

http://i527.photobucket.com/albums/c...t/e44ae7af.jpg

http://i527.photobucket.com/albums/c...t/14d78fc3.jpg

http://i527.photobucket.com/albums/c...t/e4c108d5.jpg

http://i527.photobucket.com/albums/c...t/f0b2ae7d.jpg

And I need to iron the banner what better place :)

http://i527.photobucket.com/albums/c...t/f4774beb.jpg

http://i527.photobucket.com/albums/c...t/09b842af.jpg

The spec has ended like this for now

Hurley stock port engine
Garrett T04R 70/70AR
V- Mount
Fast acting air temp sensor
TGS long runner manifold
Turbosmart Hypergate 45mm running 10psi spring at the moment
Turbosmart FPR1200 fuel reg
Turbosmart Raceport BOV
Turbosmart E-Boost Street
Turbosmart Hoses

3.5" downpipe 3" downpipe back exhaust system by TGS

Ported UIM
1ltr fuel pot rx7 std feed pump
Bosch 044 main fuel pump
twin fuel feed lines to the rails
DM motorsports secondary fuel rail
Primery rail tapped for -6 an
Stock 550cc and new Bosch 1680 high res injectors

Re-wired coils and pumps

There is prob more which I will add :)

It's looking great man! Great work!

I also love the muffler on the WG dump tube. I wish I had room to do that on my tubes.

Well here we are front water seal has gone aroun the spark plug area

So I've pulled the engine ready for the rebuild and while I'm at that I'm going to give the bay a quick paint :)

http://i527.photobucket.com/albums/c...t/55a8d9c2.jpg

http://i527.photobucket.com/albums/c...t/e892aaeb.jpg

http://i527.photobucket.com/albums/c...t/29a09bab.jpg

BIG THANKS TO JAMES

For helping me till 1200 on Friday night getting my engine stripped to see what we had inside.

It took sometime today cleaning the rotors up

http://i527.photobucket.com/albums/c...t/3c918cd7.jpg

http://i527.photobucket.com/albums/c...t/7c284204.jpg

http://i527.photobucket.com/albums/c...t/5e679a7a.jpg

http://i527.photobucket.com/albums/c...t/93ffae45.jpg

We also found the engine was using 3mm seals

I'm in the market for some 3mm conner seals, I'm guessing as I have a receipt from Hurley for the engine from the last owner that there his 3mm apex seals

Has anyone used hurley conner seals with the 3 built in springs

http://www.hurleyrotary.com/cornerseals.php

Great debate :)

Well the engine bay is back together and the engine is cleaned painted and ready to go back togeather #can not wait to drive her again lol

http://i527.photobucket.com/albums/c...t/f3cad244.jpg

http://i527.photobucket.com/albums/c...t/3b7ac373.jpg

http://i527.photobucket.com/albums/c...t/5e2ca238.jpg

I hope to build the engine tomorrow night and have back running by next Friday