Rotary Car Club

Rotary Car Club (https://rotarycarclub.com/index.php)
-   Show your rotary car build up. (https://rotarycarclub.com/forumdisplay.php?f=66)
-   -   Diary of a Madman; TitaniumTT's see you @ DGRRXI RE-REbuild (https://rotarycarclub.com/showthread.php?t=10116)

knonfs 11-15-2011 08:05 AM

Quote:

Originally Posted by TitaniumTT (Post 171945)
emmissions test before the 23rd so I can keep my reg :banghead: I hate cars...


Emissions on the FC? Mans you are are on a tight schedule!

Quote:

Originally Posted by TitaniumTT (Post 171945)
On a different note though, I will be starting full time @ Speed1 on 12/5 :D


Yeah yeah, you will be an asset to the shop, no doubt about it :patriot:

TitaniumTT 11-15-2011 10:07 AM

Quote:

Originally Posted by helghast7 (Post 171955)
holy shit! congrats! now i only have to drive one place for all my fab and info needs lol

:rofl:

Quote:

Originally Posted by WE3RX7 (Post 171956)
First off - YAY!! You will now be my fabrication bitch...

Seriously glad to hear that though man. It'll be nice to get you closer to VA and I know Dave could really put you to work! But don't think this makes you too good to respond to PMs :rofl:

I ain't noones bitch..... bitch :lol:

That's what a few people have said, Yay, you're closer to me now! I guess the Hudson is some monstrous geographic boundry for some :smilielol5:

Yeah well, sorry bout that..... when you start posting pics of this so called "progress," I'll start reponding to pm's ;)

TitaniumTT 11-15-2011 10:13 AM

Quote:

Originally Posted by Gravity Fed (Post 171962)
what part of PA are you moving too?

The sop is in Lenhartsville, which is 15-20 miles west of Allentown, you can throw a stone and hit 78, literally. Im going to be withen a 20 minute drive of the shop

Quote:

Originally Posted by 2gslse (Post 171964)
I'm going to use a Haltech platinum 1000 (not everyone needs high tech Motec) I don't have the harness built for it yet either its on my long list of crap to be done once the engine is in the car we will need to talk once things start coming together more. its gonna be a busy year coming up there a few major jobs and not enough time in the day to do them all and I will be slammed at work beginning in Jan my other half at work is retiring and no replacement in sight yet.

I know that feeling all to well. You should have us build the harness, you want us to build the harness, we will build the harness :lol: Seriously though, remember my harness? All the raychem, milspec connectors, bulkhead release etc etc etc.... yeah... let's do it that way. Give a call man, let's start figuring shit out cuz it ALWAYS takes 2-3 times as long as ya think.

TitaniumTT 11-15-2011 10:21 AM

Quote:

Originally Posted by knonfs (Post 171968)
Emissions on the FC? Mans you are are on a tight schedule!

Yeah yeah, you will be an asset to the shop, no doubt about it :patriot:

Actually, the emmissions is already a year late, but because the reg is up, they wont renew that until I take and pass an emmissions test.... fucking PITA ct....

Thanks man!

WE3RX7 11-15-2011 12:07 PM

progress pics are up... Bitch lol..

Quote:

Originally Posted by TitaniumTT (Post 171972)
:rofl:



I ain't noones bitch..... bitch :lol:

That's what a few people have said, Yay, you're closer to me now! I guess the Hudson is some monstrous geographic boundry for some :smilielol5:

Yeah well, sorry bout that..... when you start posting pics of this so called "progress," I'll start reponding to pm's ;)


TitaniumTT 11-15-2011 01:10 PM

You stacked a keg? That's progress? I bet you voted for Obama :rofl:

JhnRX7 11-15-2011 03:50 PM

Quote:

Originally Posted by TitaniumTT (Post 171945)
On a different note though, I will be starting full time @ Speed1 on 12/5 :D

NICE!!

Now you will have to join us at all the NJMP track days since you will be closer. I will have to stop in for a corner balance and check out the shop in the early spring.

Also.... I dont know if Dan told you about "BlackCarTrackCar", but once we finally get our asses in gear to start on that the first thing will be a full cage. I think we know where we can get that done now :D

knonfs 11-15-2011 06:01 PM

Quote:

Originally Posted by TitaniumTT (Post 171974)
Actually, the emmissions is already a year late, but because the reg is up, they wont renew that until I take and pass an emmissions test.... fucking PITA ct....

Thanks man!

I feel your pain, the first thing that I have to do when I get the car, is the damn e-test :icon_tdown:

WE3RX7 11-15-2011 07:23 PM

Quote:

Originally Posted by TitaniumTT (Post 171991)
You stacked a keg? That's progress? I bet you voted for Obama :rofl:

I'd rather stack 'em then blow 'em :)

What will be your focus at Dave's place? Fabrication, engine building, bodywork, tuning, all the above?

helghast7 11-15-2011 08:21 PM

does anyone know were to get borg warner airwerk turbos cheap? right now the price to beat is 800 bucks for an s360 lol

TitaniumTT 11-15-2011 11:36 PM

Quote:

Originally Posted by knonfs (Post 172029)
I feel your pain, the first thing that I have to do when I get the car, is the damn e-test :icon_tdown:

Damnit.... I think this will be my last one before im exempt but I have a feeling that because I'm a year late, they'll go by due date, not test date, meaning I'll need to take one more next year..... bastards...

Quote:

Originally Posted by JhnRX7 (Post 172013)
NICE!!

Now you will have to join us at all the NJMP track days since you will be closer. I will have to stop in for a corner balance and check out the shop in the early spring.

Also.... I dont know if Dan told you about "BlackCarTrackCar", but once we finally get our asses in gear to start on that the first thing will be a full cage. I think we know where we can get that done now :D

Yup yup, I plan on tracking a bunch more next year, and shit yeah bring her up for some cornerbalancing.... gotta do it for myself actually :rofl:

Nope, Dan never told me about that, but shit yeah bring her up... all the equipment is there and there's a few full blown track cars there now :D

TitaniumTT 11-15-2011 11:44 PM

Quote:

Originally Posted by WE3RX7 (Post 172040)
I'd rather stack 'em then blow 'em :)

What will be your focus at Dave's place? Fabrication, engine building, bodywork, tuning, all the above?

If you're not breaking shit, you're not trying hard enough :rofl:

All of the above, plus electrical. Tuning will be the main focus to start though...... soooooooo when do you wanna get the 8 strapped down again? :D

helghast7 11-16-2011 12:54 AM

Quote:

Originally Posted by TitaniumTT (Post 172065)
If you're not breaking shit, you're not trying hard enough :rofl:

guess i must be trying too hard lol

Whizbang 11-16-2011 05:41 AM

interestingly, i was looking at either allentown, pittsburg or erie for when i get out of the military. I want to be near a city, but live far enough out to have some privacy.

TitaniumTT 11-16-2011 08:35 AM

No shit? I don't know pittsburg or erie well enough, but go 15 minutes outside of Allentown and its prett hardcore farmland... so yeah


All times are GMT -5. The time now is 10:51 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Hosted by www.GotPlacement.com