Rotary Car Club - Vote for March 2013 FC of the month!

It's time to vote on your favorite FC for March rotary the month! Here are our 5 nominations:

Pete_89T2 1989 TII RX-7

DGRR 2012, carving up the dragon...
http://www.rotarycarclub.com/rotary_...1&d=1360352904

Interior shot...

http://www.rotarycarclub.com/rotary_...1&d=1360352904

Hood open shot...

http://www.rotarycarclub.com/rotary_...1&d=1360352904

Engine/Power: Engine is stock rebuild (1999), 2011 upgrade of turbo (BNR hybrid), along with Racing Beat DP & presilencer, Borla dual catback. 720cc pri/sec injectors, Supra TT fuel pump & Rtek 2.1 upgraded stock ECU. Koyo N-flow radiator & RA OMP adapter with separate premix tank.

Drivetrain: RP heavy duty clutch, Mazdatrix short shifter, otherwise all stock.

Suspension: RB Springs & KGB AGX dampers (4 way front/8 way adjust rears), stock otherwise

Interior: Restored leather seat skins, Prosport guages (Oil Temp, pressure, H2O temp in console and boost/vac on A-pillar. Custom made stereo headunit & gauge mounting

-------------------------------

rx7 vinnie 86 RX-7 parking lot terror

http://i361.photobucket.com/albums/o...e/77b49b0c.jpg
http://i361.photobucket.com/albums/o...Picture040.jpg
http://i361.photobucket.com/albums/o...carpics064.jpg
S5 stock block
48 Weber DCO carb
1 piece aluminum intake
Racing beat header
Dual MSD 6al's
Koyo radiator
Holley red fuel pump
Racing beat dual pullies
Magnecore wires
Racing beat flywheel, disc, pressure plate
2-3" Magnaflow mufflers
Ground Control coilovers and caster/camber plates
Energy suspension bushings
DTSS bushings
Racing beat sway bars and endlinks
17x8.5 Enkie Aiges wrapped in Toyo RA-1's
T2 stock brakes http://images.intellitxt.com/ast/adTypes/icon1.png
Autopower 4-point rollbar
Fuelsafe 12 gallon fuel cell
Autometer gauges
Race seat and harness
__________________

FC Zach 1987 RX7 Sport
Location: Smyrna, TN

http://rotarycarclub.com/rotary_foru...2&d=1360832905

Interior Shot!
http://www.rotarycarclub.com/rotary_...4&d=1360834324

http://rotarycarclub.com/rotary_foru...1&d=1360832727

http://rotarycarclub.com/rotary_foru...3&d=1360833069

Mod list:
-S5 TII tranny with RB short shifter and TII diff
-Lightweight flywheel and CF DF clutch
-Engine: street ported with Holly, OMP deleted, lubrication mods and direct fire ignition with two MSD 6As and 3 Jacobs Ultra Coils going through MSD Super Conductor wires.
-Koyo rad, RB silicone rad hoses (well made BTW)
-Full RB exhaust
-Full RB suspension, Cusco brace
-Pacific Glass sunroof with optional Mazda wind deflector
-Polished factory BBS wheels, BFGoodrich tires
-Curt Manufacturing trailer hitch
-Random S5 exterior and interior pieces here and there

-----------------------

MmSadda Supercharged RX-7

http://i11.photobucket.com/albums/a1...-25-24_318.jpg

http://i11.photobucket.com/albums/a1...-26-38_929.jpg

http://i11.photobucket.com/albums/a1...2237392515.jpg

Old interior shot:
http://i11.photobucket.com/albums/a1...ps602831da.jpg

Engine:
Stock ports, 30k on rebuild.
Paxton/Nelson centrifugal supercharger with upgraded 850cfm compressor wheel and 4.25" pulley
Haltech Sprint RE computer (installed and tuned by Defined Autoworks)
550cc injectors and upgraded Supra fuel pump
AEM Methanol kit

Wheels/tires:
Yokohama S-Drive (I think) 235 front, 255 rear
Enkei RPF1 17x8 front, 17x9 rear
Rolled fenders

Suspension/etc:
Tein Super Drift coilovers (not shown in engine bay pic, but on for the body pics.)
DTSS Elminators

Other:
New paint job in 2008
Aftermarket spoiler, shaved badges
----------------------------

FerociousP RX-7 Turbo Convertible

https://lh4.googleusercontent.com/-n...0/IMAG0169.jpg

https://lh6.googleusercontent.com/-d...0/IMAG0096.jpg
https://lh5.googleusercontent.com/-b...0/IMAG0108.jpg

Stock block s5 t2 jspec
stock s5 turbo (wastegate is not ported to my knowledge)
Haltech Sprint RE
Injector Dynamics ID1000 x4
Denso aftermarket Supra/FD pump
Parallel setup with Aeromotive FPR and pushlock hose, 42psi base
FMIC
Synchronic BOV
FD alt
More info

--------------------