Rotary Car Club - 1993 viper red touring single t66 turbo FD (MARK WHITES FD)

Location: New Orleans LA
Year: 1993
Make: Mazda
Model: RX-7
Milage: 105,604
Vin: JM1FD3313P0200207
Color: Viper red

http://rotarycarclub.com/rotary_foru...1&d=1281215397

http://rotarycarclub.com/rotary_foru...1&d=1281409624

http://rotarycarclub.com/rotary_foru...1&d=1281409624

http://rotarycarclub.com/rotary_foru...1&d=1281409624

http://rotarycarclub.com/rotary_foru...1&d=1281409624

http://rotarycarclub.com/rotary_foru...1&d=1281409624
Howdy folks,
I am selling this car for my beloved friend, the late Mark white, on behalf of his wife. Many of you knew Mark (Mark57) from this and many other rotary forums for he was a long term rotorhead since the 90's. He was a very knowledgeable and well liked rotary fanatic, right up until his struggle with ALS took his life. In 2008 DGRR was put on in memory of Mark and his love for rotaries, it was meant to raise money and awareness for ALS.
Truth be told, I would be buying this car in a heart beat but the timing makes it quite impossible for me to due so :(
This car is being sold AS IS and has barely been driven in the last few years. Due to this, the car has a few miner things that it may need in order to be back at 110%. I am FULLY aware of the current market value for these cars, as I buy, sell and work on them for a living. With that being said, the price of $22.5K is OBO but we are willing to wait for the right buyer. This is a non-rycE FD built buy a purest, so I don't want to see any posts about the "value" of this car because they will be ignored. We are also looking for a buyer with rotary knowledge who will not destroy it. So, no kids and NO joy rides. Please be serious about the car if you are coming to see it. This car was allways kept under a car cover under the car port.
I also recommend that anyone who IS seriously interested in it, to please come see it in person. The car is a "must see" and can better be appreciated in that way.
The car makes 431RWHP @ 16psi (as dyno'd on a mustang dyno) and is damn fast and strong. This car is not a toy and there will be NO joy rides.
The bad:
The paint has some miner rock chips in on the front of the car due to actually driving it!
The front bumper where the lip meets the bumper has some "stress" lines/small cracks due to the aero pressure at 192mph pulling down on it... Mark and I might be at fault for this :nod:
The driver side door plastic isn't the same gloss black as the center and passenger plastic.
The driver side flip up storage door has the hinges broken on it.
The two center speaker (cheapy) gauges don't work properly.
I think the car could use a new set of tires, strictly due to the age and not being driven because they are not worn hardly at all (75-80% life left).
The engine bay is still VR so it isn't an exact paint match. This isn't very noticeable though.
There is a VERY very small "dimple" in the hood, directly above the PS pump. This was caused by a PS bearing failure. A very small ball bearing hit the underside of the hood when it was slung from the spinning pulleys. Again, this is quite small.
5th gear synchro grinds but still works.
The pipes IMHO could be repolished due to just sitting.
These are all I can think of at the moment, but if I think of anything else I'll be sure to update it.

VIN: JM1FD3313P0200207 < This FD is actually one of the first one in the states and actually has a production date of 12/91!
Engine:
Stock ported rebuild and clearancing by Rotary Performance. Engine has roughly 36K on it.
Turbonetics T-66 turbo charger.
South florida divided turbo manifold. Ceramic coated.
HKS 4 bolt wastegate (50mm I believe).
3" down pipe, 3" magnaflow mid pipe and 3 3/4" greddy catback.
Greddy 2 row FMIC and polished piping.
TurboXS BOV.
IAT sensor re-location.
J-spec upper intake manifold.
Greddy elbow.
NGK plug wires.
NGK #9 spark plugs.
Jacobs Fire Control 1000 ignition system and FC C-4 ignition coils.
700cc primary and 1200cc secondary injectors.
Rotary performan high performance fuel pump.
Power FC and commander.
PCV catch can system.
Fluidyne radiator.
Greddy Alt. and WP pullys.
Engine torque brace.
ACT street clutch.
SR motorsports aluminum flywheel.
SS braided clutch line.
Aluminum AST.
Greddy airtronix intake filter.
New Mazda engine harness (8K on it).
Yellow top optima battery relocated to rear PS bin.
Grounding straps throughout engine bay.
And much more...

Interior:
Black interior 8 out of 10.
93 touring with black leather.
Sparco Race steering wheel (leather and seuade).
Sparco removable steering wheel hub.
Single A-pillar guage mount.
Defi boost gauge
Greddy shift knob
Pro G-force 4 point harness'.
Custom "buckle in buckle out" rear strut tower bar/harness bar.
"RX-7" scuff plates.
Greddy profecB EBC.
Greddy hi-low boost wireless steering wheel switch.
Inovate WB sensor and "monitor".
JVC KD-G820 WMA MP3 head unit.
B&M short shifter with new OEM bushing.
After market door and rear speakers (I don't recall the brand).
Painted center console and passenger side door plastic.
Yellow top optima battery relocated to rear PS bin and 200A phenix gold breaker.
Bose removed.
Non bose rear carpet.
New mazda evap-core.
New OEM AC fan speed switch.
and much more...

Exterior:
9.8 out of 10
New (3.5 year old) Dodge viper red paint job. All body panels, doors, bumpers, hatch and hood removed and painted. Door jams, inside fuel door and rear hatch jams painted (not engine bay).
New OEM gaskets used upon reassembly.
Handles, cowl, front wipers, fuel cap surrounding shroud and small door triangles painted gloss black.
Front and rear wheel wells, sun roof inner surrounding, pop up light surroundings, frame rail seam weld and OEM rear exhaust heat shield painted semi-gloss black.
99' JDM front lip.
OEM mud guards front and rear.
Smoked front turn signals.
Hi output blue headlight bulbs.
Black efini badges front and rear.
RX-7 efini rear badge.
OEM rear spoiler.
Custom rear bumper exhaust heat shield.
And so much more...

Running gear:
Fikse FM10's front and rear. Front 17x8.5" with 37.7mm offset, Rear 17x10" with
44mm offset. Powder coated hi-gloss black.
Sumitomo rubber, 255 45/17 front and 275 40/17 rear.
Front and rear brake rotors and calipers paint matched with Viper red.
SS brake lines.
Drilled brembo performance rotors front and rear.
Koni yellow's and ground control coilovers with eibach springs.
Custom rear strut tower brace.
OEM R1 front strut tower brace with gloss black feet.
And so much more...

Thank you in advance for your interest and God bless! :icon_tup:
Please feel free to contact me with any questions that you may have via PM, email or phone call.
-Jonathan
504.952.2936
jonathan@gorillare.com