Rotary Car Club

Rotary Car Club (https://rotarycarclub.com/index.php)
-   Introduce yourself!! (https://rotarycarclub.com/forumdisplay.php?f=64)
-   -   New guy from ohio (to this site) (https://rotarycarclub.com/showthread.php?t=15288)

Dimitry04 01-21-2012 05:58 PM

New guy from ohio (to this site)
 
Names Kyle, and i used to own a 1987 rx7 base or sport. i ended up selling it cuz it had totaled before and i lost interest with fighting with it to get it straight. i bought it with a rebuilt slavage title. Now im getting ready to purchase a 1990 GXL =] im excited to get it. its a lot nicer.

I love pop-up lights 01-22-2012 02:06 AM

Congratulations, starting off with a cleaner car is always nice. Welcome

Whizbang 01-22-2012 06:02 AM

what part of Ohio?

Dimitry04 01-22-2012 07:29 AM

northeast

PortedRotorTuner 01-22-2012 12:34 PM

Welcome.
You should come to the Deals Gap Rotor Rally 2012 with us! :willy_nilly:

jimstaz 01-22-2012 03:05 PM

a new start is always good.. :)

speedjunkie 01-22-2012 04:17 PM

Welcome! I agree on the DGRR comment.

Dimitry04 01-22-2012 06:34 PM

wheres it at?

Dimitry04 01-22-2012 06:58 PM

wow. id love to. but im getting car in feb as soon as storage unit opens up and it prolly wont be done by then. i gotta paint it and it prolly wont be nice enough out for that til the summer. id have to do in my garage and need somewhat warm..

speedjunkie 01-23-2012 09:25 AM

As long as it's reliable enough, it doesn't matter what it looks like man.

infernosg 01-23-2012 01:04 PM

Where in NE Ohio? I'm down in Cinci but I know a lot of guys up in the area. The Ohio Mazdas (not just rotaries) are a very active group.

Dimitry04 01-23-2012 01:58 PM

akron area

jimstaz 01-26-2012 10:57 PM

i totalled a car in ohio because of a coyote... becareful! lol

ball joint 01-27-2012 09:58 AM

Always glad to see another rotary guy from NE Ohio. If you ever need any help feel free to send me a message. There's a great community of rotor guys in Cleveland that know these cars backwards and forwards.

Dimitry04 01-27-2012 10:07 AM

where you at exactly? and actually i got a question if anyone knows an answer

ball joint 01-27-2012 10:16 AM

Quote:

Originally Posted by Dimitry04 (Post 179771)
where you at exactly? and actually i got a question if anyone knows an answer

I live in Bay Village on the West Side of Cleveland and I do tuning. My partner also lives on the West Side off of w117th and he is one of the best engine builders in the area.

Ask away.

Dimitry04 01-27-2012 10:32 AM

Quote:

Originally Posted by ball joint (Post 179774)
I live in Bay Village on the West Side of Cleveland and I do tuning. My partner also lives on the West Side off of w117th and he is one of the best engine builders in the area.

Ask away.


1.. the car is missing the air pump belt, and i have no idea for how long its been missing. meaning my luck. the actuators and stuff are stuck on the ports. which is no bueno. cuz no one wants to lose power. haha. whats the chance of you knowing part numbers for all belts ill need and where to get them. i was gonna see about replacing all of them. seeing as how to do the air pump. two of the belts have to come off anyway.

and 2. it has high miles. like 166k high. however it doesnt smoke hardly at all. one of the mufflers has a hole in it and im assuming thats where the little smoke is from. cuz it only smokes from that side. my 87 had 125k and smoked like a siv. my question is, is that good, im hoping cuz i really dont want to change the engine out yet. hes giving me another block, supposedly rebuilt but i have no proof so i dont buy it. but hell its another engine. i was planning on doing a compression test when i get it. but i want a little reassurement from people who know that its p rolly got life left. eveything ive seen was if it dont really smoke even on startup your golden. at least i hope thats the case

ball joint 01-27-2012 03:50 PM

Quote:

Originally Posted by Dimitry04 (Post 179776)
1.. the car is missing the air pump belt, and i have no idea for how long its been missing. meaning my luck. the actuators and stuff are stuck on the ports. which is no bueno. cuz no one wants to lose power. haha. whats the chance of you knowing part numbers for all belts ill need and where to get them. i was gonna see about replacing all of them. seeing as how to do the air pump. two of the belts have to come off anyway.

and 2. it has high miles. like 166k high. however it doesnt smoke hardly at all. one of the mufflers has a hole in it and im assuming thats where the little smoke is from. cuz it only smokes from that side. my 87 had 125k and smoked like a siv. my question is, is that good, im hoping cuz i really dont want to change the engine out yet. hes giving me another block, supposedly rebuilt but i have no proof so i dont buy it. but hell its another engine. i was planning on doing a compression test when i get it. but i want a little reassurement from people who know that its p rolly got life left. eveything ive seen was if it dont really smoke even on startup your golden. at least i hope thats the case

1. Contact Ray Crowe at Malloy Mazda 888-533-3400 (ask for parts department and ask for Ray). This guy is the human encyclopedia of RX7 parts and will be more than happy to help you out. Many people on the forums use him for parts.

2. It's going to be really hard to say at 166K miles what is causing the smoke. These motors do tend to smoke a little bit but if it's excessive and/or thick and white then you might have another problems. I'd perform a compression check and check your coolant for oil. If the water seal is gone then you will see some residue in the coolant and you should also see uniform low compression on all three rotor faces (if you have low compression on one of the rotors). Other then that it could be oil seals (blue smoke). As long as it's not smoking excessively I wouldn't worry about it.

If you ever want to rebuild the engine, or are considering it, feel free to shoot me a message and we'll discuss what you want to do.

Dimitry04 01-27-2012 10:48 PM

sounds like a plan. i did come across all the belts. got dayco top cog from my work for 51 bucks for all four. 3 year warranty. =] and then it barely smokes at all. thats what i meant. i was wondering if that was good or not. and the coolant. he said he changed all the oil and coolant and everything didnt say there was an issue or anything. but of course hes a seller. prolly wont. however. i trust him seeing as how he has such a high rating for seller on rx7club. so i pretty much believe that its still good. and actually another question. would you be up for comin down sometime and maybe checking out the spare engine hes giving me. he claims its been rebuilt and was running flawlessly in another car but i have no proof other than his word and i dont know what to look for.

ball joint 01-28-2012 12:57 PM

Quote:

Originally Posted by Dimitry04 (Post 179868)
sounds like a plan. i did come across all the belts. got dayco top cog from my work for 51 bucks for all four. 3 year warranty. =] and then it barely smokes at all. thats what i meant. i was wondering if that was good or not. and the coolant. he said he changed all the oil and coolant and everything didnt say there was an issue or anything. but of course hes a seller. prolly wont. however. i trust him seeing as how he has such a high rating for seller on rx7club. so i pretty much believe that its still good. and actually another question. would you be up for comin down sometime and maybe checking out the spare engine hes giving me. he claims its been rebuilt and was running flawlessly in another car but i have no proof other than his word and i dont know what to look for.

I could do a compression test on it but to really find out what's going on it would have to be torn down.

Dimitry04 01-28-2012 07:17 PM

that would be great. aside from tearing it down. and that im spending my budget getting it and doing a few things to it. so i couldnt pay you. and i wont make you do that. im sure you wouldnt want to waste your time on someone elses car for nothing..

Whizbang 01-28-2012 11:49 PM

well ask the question!

just startn 01-29-2012 02:24 AM

West Side off of w117th and he is one of the best engine builders in the area.

Who?


All times are GMT -5. The time now is 01:31 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Hosted by www.GotPlacement.com