1993 Black RX7 - NEW Paint, Engine, Interior, A/C - Tons of quality parts
 

The ONLY reason I am selling is because I am moving overseas to Europe. I absolutely LOVE this car, and do not want to sell it, but I have an opportunity I need to take over there.

As you will see, in just the past 6 months i have invested a lot of money in new parts and paint etc because I thought I was staying here in the US, but plans change, and someone is going to get the benefit of all my work ;)

This car has everything already upgraded and ready to go single, or just enjoy the max potential of the stock twins.

Derrick at Advanced Race Technology has done 90% of the work on my car, and has been taking care of it for the past 4 years. Feel free to call him and ask about the quality of the car, he knows it in-and-out.

Mileage approx ~118k, will update as I drive.
Base model w/ no sunroof (lightest body), was originally an auto, but first owner who had the car most of its life had mazda convert to 5spd around 40k.


EXTERIOR
--------------
NEW brilliant black paint, proper paint job with all dents removed, emblems removed etc, finished just a few months ago, cost $4k
Feed burnout front bumper
Feed side skirts
NEW front windshield and moulding (not due to any accident, truck kicked up a rock that chipped original)
Aluminum door handles (oem plastic ones break often)
Great quality tint, not sure how dark, but it's pretty dark
Fenders rolled for tire clearance


INTERIOR
--------------
Interior panels at the shop all currently being refinished (will post pics when finished) will look like new!
NEW A/C compressor, new condenser coil, new o-rings, re-conditioned drier and fresh charge R-134 converted. A/C blows as good and cold, needs nothing
NEW Red Corbeau A4 seats (fits my 36" waist easily and very comfy)
NEW Custom mounted red Speedhut 10k Tach with built-in 5 LED progressive shift light in factory location
B&M short shifter
Sony MP3 headunit (ipod slides inside the unit to keep it hidden and out of the way)
replaced speakers all around
Banzai racing PFC commander mount
Side pillar triple gauge pod, currently has water temp and boost, 3rd spot empty


RELIABILITY
--------------
Pettit Aluminum AST
Koyo Radiator
Coolant flushed and coolant hoses replaced
Braille Lightweight AGM Racing battery
Rich mans non-sequential conversion w/ ported wastegate
Fuel filter replaced less than 10k ago
Redline fluids in tranny and rear diff less than 8k ago


WHEELS, BRAKES, SUSPENSION
--------------
(all of the following installed March '12, less than 5k miles on all of it)
Stock replacement rotors all around
EBC Red stuff pads all around
BC Racing fully adjustable coilovers
Stainless steel brake lines
ATE Super Blue fluid
Hankook V12 Evo tires
215/40/18 front 255/35/18 rear
XXR 521 gold wheels 18x8.5 +25 front , 18x10 +25 rear


ENGINE
--------------
NEW RC Engineering flowed/tested 1300cc secondary injectors
NEW Walboro 400lph pump (awesome and quiet)
NEW RC Engineering Big Bore throttlebody
NEW Greddy Profec2 boost control
Greddy SMIC
Greddy intake elbow
Apexi PowerFC , original style commander (not the fancy new colorful one)
K&N intakes
3" downpipe
3" Magnaflow midpipe
Racing Beat dual tip exhaust
HKS Twin Power
Xcessive urethane motor mounts (firmer than stock, but you get used to it after a few days, holds engine in place better)

NEW re-built streetported engine by Advanced Race Technology (currently being installed, will post numbers after break-in period)
Previous stock-port engine dyno'd 332rwhp at 14lbs in 90* florida heat… new engine will make a lot more ;)

WHY would I install a new engine in a car I am selling?
Because of my bad luck and dumb mistake :(
I was just about to list the car for sale a month ago when I was cruising through my neighborhood and one of the coil-packs for the rear rotor failed. I didn't know it was the coil pack at the time, so I had tried starting it a bunch of times while changing things like plugs and wires etc to find out why there was no spark. After replacing the coil pack, I had spark again, but I found that all the fuel flooding the rotor with no spark had washed out the seals, compression was down to 70 on the rear. Initially I ordered a JDM motor to swap in quickly to sell the car, but after being ripped off by Japan2LA, I decided to just have Derrick at A.R.T pull my engine and do a proper full rebuild so the car is fresh and ready for her new owner.


THE BAD
--------------
1- Transmission was the last thing on my list to rebuild. As usual, the 5th gear syncro is totally worn out, and the 1-2 syncro is fairly notchy as well, but still plenty drivable. New owner can rebuild with stronger syncros, or swap in a low mileage JDM unit for under $350, whatever you prefer.
I have an ACT Street/Strip clutch with only 9k miles on it that I will include with the car for when you rebuild the tranny ;)
2- Radio antenna goes up, but doesn't go down without pushing it by hand. I only listen to iPod in the car so I never used it anyway, never bothered to fix.
3- The feed front bumper has a small crack in lip, will post photo later. Quoted $200-250 by bodyshop to fix, I don't have time to deal with it.



As you can see… I've put easily over $15k into this car just this year alone, as I mentioned before I planned to keep this car for a long time.

90% of this car is either NEW or like-new…. I feel like I'm practically giving it away, but I don't have time to wait around for what it's really worth.

I'm asking only $17,900 for a quick sale, since I'm leaving the country soon.

*edit * PRICE DROP TO $16,500 i am out of the country permanently now and would like to get this sold.

New engine and interior should be finished within a week or two, then I'll add photos of the interior :icon_tup:

http://i199.photobucket.com/albums/a...ps2c55fb74.jpg

http://i199.photobucket.com/albums/a.../DSC_0084s.jpg

http://i199.photobucket.com/albums/a...DSC_0038s2.jpg

http://i199.photobucket.com/albums/a.../DSC_0078s.jpg

nice whip bro and something that i've been looking for but then i wouldnt be back for couple months either.. so if your still around when i come back stateside i'll come and check it out and we could talk something out

thanks! hopefully its sold by then since im leaving before the end of the year ;)

oh, well im not schedule to come back until late jan to early feb bro..

ah bummer... well goodluck in your hunt when you get home!

Just found out I got a shot published in Modified Mag and on their website as well, for the DGRR coverage.

http://sphotos-a.xx.fbcdn.net/hphoto...16686508_o.jpg

http://sphotos-a.xx.fbcdn.net/hphoto...93883392_o.jpg

http://sphotos-b.xx.fbcdn.net/hphoto...27230539_o.jpg

interior done, being reassembled this week.... open to reasonable offers

I wish you the best of luck selling it, If i had that money i would gladly take it off your hands!

thanks! :cheers2:

all PM's replied, thanks

just went by the shop today theyre slammed with work and behind on getting mine finished, but atleast i know its being done correctly. engine should be dropped in tomorrow or weds.

interior parts looks nice and fresh, being re-installed now also.

will take some pics for you guys asap, thanks for all the kind PMs and posts... im going to miss this car so bad!

allllllllmost done....its like torture waiting for a shop to finish your car lol...but at least i know its being done correctly and not being rushed.

well, finally got the car back!
it took a lot longer than expected, but it turned out very well.... someone is going to get a hell of a nice car for cheap ;)

UPDATES

rebuild is complete with full street port, and Peter Farrell Supercars housings (thanks to AllRotor93) and full Atkins Cyro-treated rebuild kit ($$$!!!)

Im putting the breakin mileage on it now, then will have it tuned soon.... this thing should put down some very nice numbers.

also, this is a plus for the prospective buyer, since the new Feed front already has a small crack in it, im going to include the original OEM front bumper with blacked out signals and R1 lip (all together worth about $350-$450), so if you don't like the Feed front end, you can swap back to the original and sell the Feed (and make a profit)

as promised, here are the interior pics (valentine1 not included with the car)

http://i.imgur.com/OumjZ.jpg
http://i.imgur.com/LT8u1.jpg
http://i.imgur.com/eHyPK.jpg
http://i.imgur.com/RkxBM.jpg

pm sent

replied ;)

Ok, just got word from back in FL. The original injectors (even after cleaning) were still not good and causing tuning problems. I ended up having them put brand NEW injectors in, and now the tune is running super smooth!

Also just had the 500mile break-in oil change, and tossed in new plugs as well. Shes ready for a new home and someone to love her!

PM sent

i saw it.... cant entertain anything like that. i have moved overseas and cannot deal with any sort of trades or payments etc.

bump

Have you sold the vehicle yet?

its still available..... was not available to be shown for a few weeks because the friend storing it went on a snowboarding trip, but hes back now and its ready to go.

Price drop to $16,500.

Damn, figured you sold this already. I commented on this vehicle when I was down range in Afghanistan but you said you couldn't hold onto it for me. I bought a black one when I got back for 14,500.. If I knew you was still available I would have picked this one up. You pretty much have everything I want done to it

yeah had a deal fall through so it didnt sell when i thought it would... i also have not been trying very hard to sell it since im having too much fun overseas haha.

wish we had connected again, but i hope you got a nice car and enjoy it!

I enjoy the rx7 and its all stock but id rather have had your car.. If I can sell my car before I head over to Kentucky and you still have this car for sale, I'll definitely pick it up

Beautiful! I am in the market for an FD! I have cash ready if it is still for sale. LMK

I continue to get a lot of interested emails and PMs, but mostly people who cannot come up with the money when it comes time to pull the trigger :(
Maybe this will help
Price drop to $15,900 or best offer!

dud judt take it with you, whats stoping you , i know for a fact you can get it shiped for around 800 to a 1000 , what country are you going to ? as long as it's not switzerland you'll be fine ( the swiss govenment hates cars )

good idea... but i cant :(

i was initially moving to Prague, but then plans changed and I ended up living in Thailand... which is a good thing, since Thailand is like 10x more fun than Europe.

the problem with importing to thailand is they have a 200-300% import tax on vehicles coming in.... and some guy at the customs office gets to make up the initial value of your car when it arrives.
so i can bring over the car... and when it arrives, some greedy bastard at customs says its worth $XXX and I have to pay another $20k in taxes.... if you dont pay, they just keep the car.

i wont be purchasing a car here either, would not even be able to use it where im living.

just to give you an idea of car prices for imported brands.
a new Mbz SL350 is $500k USD
a new BMW 535i is $250k USD
used 93-95 FD RX7's go for around $30-35k USD

had a few tire kickers and dreamers, but no solid offer yet... i understand the market is fairly soft right now for FDs, so....

PRICE DROP, $14,500 OBO

My offer still stands! :)

Still For Sale??

Any idea what it would take to get this to Ontario Canada? Have any engine pics? I'm looking to buy one ASAP.

Car still available?

still for sale? super interested:driving:

Same here... would love to take this car off your hands.

Car was sold.

Here is the happy new owner.

http://rotarycarclub.com/rotary_foru...ad.php?t=17720

Alright then! So yes, I have owned this car since last October...I've put at least $8000 into it plus about 200+ hours of my own labor.

The car now has a IR Performance built "Stage 3" motor with a Borg Warner S366 single turbo. I've also swapped all of the interior to black and put a TON of new & high quality name-brand parts on this car.

I am now toying with the idea of selling the car to help finance the purchase of a home.

If anyone is interested, check out the new thread I am posting in this section...