Cosmo 86 sport South Carolina
 

Considering selling off all of my stuff, so I'm gauging interest. The are a few minor things available that aren't listed.
Custom Turblown manifold set up for twin Tial wastegates: 400.
Two 44mm Tial wastegates: 400.
3.5" downpipe with gates plumbed back in: 100.
TD61 turbo 1.15 hotside (about 350 miles on it) 900.
Wannaspeed water injection kit: 300.
Haltech PS1000 with 3 bar MAP: 1000.
725cc injectors x 2 and 2200cc injectors x 2: 375.
FFE trigger kit: 200.
Mercury marine coils x 4: 200.
Full set of NGK race plugs (brand new in box): 120.
Godspeed intercooler set up for V-mount: 100
Shook Motorsports radiator: 350

I'll do everything listed for $4000 plus shipping at the buyers expense. Parts are located in Lexington, SC.

If you want the whole car (1986 non-sunroof car with 4 piston suspension), including a set of RE-Amemiya 17x8 and 17x9 wheels and a custom exhaust, I'll do $6000.

I'm potentially interested in that turbo and the WG's..

Are the WG's MV-R's, or just the standard Tial 44mm's?

Standard 44mm. Both were serviced and rebuilt by Tial in the last two months.

Ah, gotcha, yeah... I'm looking for eithe the MV-R's or MV-S's. No worries.

I'll kick you a PM about that thar turbo ;)

Bump

If those coils are IGN-1A I will take them.

Sorry for the delay. I am waiting to hear back from someone wanting to purchase the ecu and could together. If I don't hear back from him tomorrow, they are yours!

the haltech just sold along with the coils. I apologize for the delay in putting this up but I just met with the guy to hand it off.

OK. Tomorrow is my birthday. In an effort to generate some funds for my next project, and as my Halloween gift to you guys, all parts are 20% off between now and midnight tomorrow. Shipping is still on you. LOL.

Happy Halloween!

Sent PM regarding the FFE trigger kit. .

Update: Full 13B-RE intake manifold, TB, modded elbow setup, turbo, downpipe, intercooler, massive radiator, injectors, race plugs, water injection, custom exhaust, Ground Control coilovers, RE Amemiya AW7 wheels, BWave front bumper, Tii side skirts, Euro side marker eliminators, Jspec S5 front turn signals, removable steering wheel, old Rotary Extreme diffuser, M300 wideband, Atihun FG hood, custom oil cooler lines, 13B-RE/20B engine mount adapters, custom JasonS berber for mats. All of this plus a non sunroof chassis for $4000

does the FFE trigger kit come with the hall sensor?

The trigger kit has been sold.

Parts arrived today, thanks!

Side skirts are pending.

I would like this stuff GONE. If anyone is interested, I will sell everything as a new package deal. Moving the whole car makes it easier to get all of the parts to you that way. LOL.

Here is a list of things that will come in the package:
Atihun hood. Unpainted. This is the hood that Ronin now sells.
Old Rotary Extreme diffuser.
B-Wave replica front bumper with lights
Euro side marker eliminators
Disassembled 13B-RE motor with all manifolds
FFE Cosmo primary rail
PLX M300 wideband
Mounting adapters for above motor
TII driveline
TD61 turbo
Wannaspeed water injection kit
Custom exhaust with Magnaflow presilencer and 3 Vibrant presilencer
Racing Beat camber adjust rod
929 brake booster
Ground Control coilovers
3 gauge center pod
Prosport boost gauge
Tekniq removable steering wheel
Apexi N1 cat back
Base model chassis with 5 lug conversion. No sunroof.
Walbro 255 and possibly 400 fuel pump
Godspeed intercooler
Shook Racing radiator
Custom oil lines for RE swap
3.5" downpipe
NGK race plugs
S5 jspec turn signals
TII side skirts
Custom floor mats

I might be missing a couple of things, but that is the gist.

3600. That's a hell of a deal for a lot of stuff!

FFE primary rail
 

Message sent, I want the FFE primary rail. Does it come with o-ringed end fittings?

Can you elaborate on the "Euro side marker eliminators?" Are they for the front and/or rear?

I just realized I'm missing both front side marker lenses and this may be a better option than buying new ones.

They were available on the European models. Instead of having the lens like our US models, they are just solid, uninterrupted trim. Sort of like short versions of the door trim. LOL. In case I didn't say, they are S5. Oh, front and rear.

You have PM. I'm interested if you're willing to separate them from the fenders.

Euro trim, wideband, and primary fuel rail are GONE!

Bump. Make me some offers, guys. I need to get rid of this stuff!

Update. TD61 turbo, downpipe, intercooler, massive radiator, 2200cc injectors x2, race plugs, custom exhaust, Ground Control coilovers, RE Amemiya AW7 wheels, BWave front bumper, Tii side skirts, Jspec S5 front turn signals, removable steering wheel, old Rotary Extreme diffuser, Atihun FG hood, custom oil cooler lines, disassembled RE motor, 13B-RE/20B engine mount adapters, custom JasonS berber for mats. All of this plus a non sunroof chassis for $3000.

PM sent

The chassis is now sold. Here is what is left:
RE Amemiya AW7s. 17*8 and 17*9 +35 Faces are powder coated copper. 1000 plus shipping. Come with decent tires.
Apexi N1 catback and midpipe. 350 shipped by Greyhound. Any other shipping is at buyers additional expense.
TD61 turbo. 500 miles on it. 1.15 hot side, fully divided. 800 shipped.
2200cc injectors EV14 from fuelinjectorconnection.com. 245 shipped. I will include a pair of the FFE adapters that replace the rubber bottom seal.

2200cc injectors EV14 from fuelinjectorconnection.com. 235 SHIPPED. I will include a pair of the FFE adapters that replace the rubber bottom seal.
RE Amemiya AW7s. 17*8 and 17*9 +35 Faces are powder coated copper. 850 plus shipping. Come with decent tires.
Apexi N1 catback and midpipe. 350 shipped by Greyhound. Any other shipping is at buyers additional expense.

Turbo is pending.

Between now and Christmas:

Injectors 200 shipped
Wheels 800 shipped
Catback 300 shipped

Adding:
Jspec S5 turn signals. 115 shipped
Speed Machine Performance Cosmo mounts 185 shipped.

Turn signals are now gone!

Definitely need to move these last items.