FD Air pump Deletion Idler (Interest feeler)
 

- Remove your air pump and still have full belt contact with water pump
- Idler will have a CNC cut Aluminum pulley with a double row sealed bearing rated at 12000RPM

The brackets and the shaft are steel. The shaft can be adjusted forward and back for belt alignment with belt adjustment being the same as stock with the stock sized belt. Single turbo applications may use a smaller belt which will allow the idle to tuck closer to the motor.

Pricing will be based on interest.

http://img2.putfile.com/thumb/4/11801341785.jpghttp://img2.putfile.com/thumb/4/11801341749.jpg
http://img2.putfile.com/thumb/4/11801341713.jpghttp://img2.putfile.com/thumb/4/11801341792.jpg
http://img2.putfile.com/thumb/4/11801341757.jpghttp://img2.putfile.com/thumb/4/11801341723.jpg
http://img2.putfile.com/thumb/4/11801341764.jpghttp://img2.putfile.com/thumb/4/11801341719.jpg

I'm in and will start the list.

1. Blwnrtr93
2. CP1
3. Surfmon
4. Herblenny
5. Proxy One

David showed me this at DGRR ... Impressive Craftsmanship :) ... great job !!

Im in! depending on price though... i would be willing to spend $150 MAX otherwise it is actually worth my time to make it myself!

(i am a machinist in a full service machine shop)

i'm interested as well

Cp1 Start making yours , the bearing is over $ 50 and the pulley cnc cut will be more than it will cost you to do your own for sure .Chadwicks unit may be less than $ 150 .Please check with him ,his unit is different but is well made .

I'm in!

I have some of the brackets made and the shafts cut .I am still price shopping the pulley to be cnc cut .

Count me in too, depending on the price though.

I'm very curious of the price too...

Unless someone cuts the pulley for less than the prices I have ,the cost will be $ 200 with SS bolts .I am looking for a less expensive pulley before ordering them .

Still interested. And since the car's going into storage for the winter soon....still waiting.

I will try to find a shop to cut the pullies soon ,now that I have moved to the new house and bigger shop .

Garfinkle have you tried WWW.Pulleyboyes.com talk to Chris on what you have to do to get a quote..

Dan

Im in ..

I have not had the pullies made but I am tring to keep the price at $200 or less .I have the double row bearings ,$50 plus dollars and the shafts and brackets .I need to find a shop to make the pullies .

Do you require any deposit in order to secure one(once they are ready?)

When they are ready I will post it and the sale will be first come first served .

I have some ready to ship $ 200 plus shipping . Alum pulley .double row bearing ,30 MM steel shaft ,steel brackets , fully adjustable .

I have several ready to ship .

I have installed an idler on a car with a single turbo It may fit others as well .

i really need this but haven't quite finished my new turbo manifold and will have to wait a couple of weeks to see if i will have the space.

howard

p.s. i have a need for a couple of engine torque braces in the next couple of weeks and will be installing your oilpan brace on all my motors...

www.colemanprecisionrotaries.com

When you are ready I can send you one to try the fitment . You can shorten the adjusting arm I am sure. I do not supply the adjusting arm you must cut and drill your stock one .