Rotary Car Club

Rotary Car Club (https://rotarycarclub.com/index.php)
-   3rd Gens (https://rotarycarclub.com/forumdisplay.php?f=52)
-   -   504rwhp 3rd gen (https://rotarycarclub.com/showthread.php?t=564)

sk8world 03-04-2008 12:13 AM

504rwhp 3rd gen
 
This was a pull from Sept. 07. BDC streetport, atkins 2 piece seals, garret 4094, 22.5 psi.



85rx-7gsl-se 03-04-2008 12:16 AM

Sexy Car, seen it in person :D

fikren 03-04-2008 12:44 AM

love the sound of a spooling turbo and then the dump its kinda like sex, nice build up with a big AHHHHHHHH at the end.

sk8world 03-04-2008 01:11 AM

thanks
 
thanks guys. I could not wait to get the video to here it myself.

85rx-7gsl-se 03-04-2008 01:14 AM

I posted this up on my local forum for the Supra guys to get a taste of rotary goodness :D

KaiFD3S 03-06-2008 04:18 PM

I never get tired of that spool up sound...

Brent 03-06-2008 06:42 PM

Looking good Mike!!! Can't wait to see it at the sfs event in October.

sk8world 03-06-2008 11:19 PM

Quote:

Originally Posted by Brent (Post 4908)
Looking good Mike!!! Can't wait to see it at the sfs event in October.


Thanks Brent. Yeah, I will be there. I should have the new clutch in and I am going to add a FJO inj. kit. Oh, and a line lock... But thats it for now. So really nothing holding me back except for being a dyno queen..and poping a motor..

sk8world 03-15-2008 11:32 AM

posting another, but forgot youtube code

sk8world 03-16-2008 01:52 AM

trying again
 

BLKTOPTRVL 03-16-2008 10:24 AM

What does 504 HP do on the street?

sk8world 03-16-2008 12:31 PM

Not real sure what your asking.. 504 on the street does everything a stock 225rwhp FD does and much more.

1. out runs the new z06 vettes, S.Charged Mustangs, and many other fast cars. It also does great burn outs!!

But my main reason for chasing high hp is the drag strip...

BLKTOPTRVL 03-16-2008 05:50 PM

Yes, what I mean is... what performance figures (0-60,1/4) does 504HP equate to?

sk8world 03-16-2008 11:32 PM

I will be posting some videos soon. I have to break in my new clutch first.
Zinx, on a thread below ran 10.8 or .9 in the 1/4 with just a tad less rwhp.
So thats my goal for now, a 6.9 in the 1/8th and 10.9 in 1/4.

busted7 03-18-2008 12:39 PM

You dont need quite that much h/p to run 10.8 i have 460/480 hp and run 10.87 at 127 mph with 1.52 60 ft time. Zinx has me beat in the 1000 ft but not the 1/4 yet! But im sure he will with his new set up and im pulling for him and you. Keep us posted.

sk8world 03-18-2008 01:02 PM

.
 
Quote:

Originally Posted by busted7 (Post 8263)
You dont need quite that much h/p to run 10.8 i have 460/480 hp and run 10.87 at 127 mph with 1.52 60 ft time. Zinx has me beat in the 1000 ft but not the 1/4 yet! But im sure he will with his new set up and im pulling for him and you. Keep us posted.

Well I figured I needed a little room to play.... By looking at your 60 footers I will need the extra hp! I have never cut better than a 1.74. That was on BFG DR's. I had et streets years ago but never left hard on them as i was adraid of breaking. But I have another pair coming soon.

busted7 03-18-2008 08:29 PM

Just to let everyone know i run a set of 10.5 et's and a set of 11.50 et's so far the 10.50 are the best 1.52 at 15 lbs the 11.50 is 16.2 at 18 psi. With the 11.50 i had to go up in pressure to get a little slip or it bogs bad. Launch rpm is 7800 on both and hasn't broke yet. I have been running the 11.50 on the street becouse it gets too happey but im getting a set of nitto 275 35 road course tires to see if they hold. 100 tread wear with same compound as the drag radal. LOL

sk8world 03-18-2008 10:30 PM

just ordered my et's in 105. sure wish they had a lower tire height! 26 is tall...

busted7 03-19-2008 09:27 AM

Thats the same height as 265 35 18 you will be ok thats what we all run at least zinx and myself.

I8U 03-19-2008 04:20 PM

Here's one to beat it! 685 rwhp, 470tq!!!


http://youtube.com/watch?v=8E7J93DnIxM

sk8world 03-19-2008 04:27 PM

Yeah, I used to run these same ones years back. I have run Nitto's, BFG's and et streets over the years on my FD. I told myself I was done with drag racing and sold them all except the bfg's. HAHA..
I was just saying that I wish they had a lower side wall for the looks. But then again that kills the main purpose.

Summit racing kicks ass. I ordered these yesterday 3-4pm and guess what came the next day at 2pm! Ground shipping.

sk8world 03-19-2008 04:36 PM

Quote:

Originally Posted by I8U (Post 8592)
Here's one to beat it! 685 rwhp, 470tq!!!


http://youtube.com/watch?v=8E7J93DnIxM


Yeah I have scene this before. No doubt one very fast car. Crispeed knows a few things. IS this your car? Or you posting others?


All times are GMT -5. The time now is 06:08 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Hosted by www.GotPlacement.com