|
Project Snow Drift
Well, heres my Build of a Stock N/A To Possible Turbo Drift FC
For Starters it'll get a Clutch swap, and Intake. i'll post up install pictures, as well as before and after shots.:001_005: |
Gl man, ill be watching to see how you do.
|
Any more info?
|
Sounds like fun. Get some pictures when you can :D.
|
lets see how shes going post some pics
|
When you say for starters you're doing the clutch, etc. Does that mean you're staying NA for a while? If you want to go turbo, then you'll end up selling the clutch you get for the NA...
|
It Is Gonna Stay N/A For A While. and Personally wanna Build a Turbo set up on this Motor.
Got my Intake Install (ebay FTL), lol The Piping they sent wouldn't work so i used factory and attached a High Flow Filter to it. lol Pictures up tomorrow when its light outside lol. |
the factory intake piping will make the same power as any intake you'll produce from piping. So it might not be worth your time or expense.
|
building and turboing a n/a isnt always the easiest or most cost effective. if you wana turbo then by a t2 engine and swap trust me its better.
|
EVeryone's told me that Swapping a Turbo Engine into a N/A is stupid, in fact i got a buddy who'll trade me a Turbo Car for my Car.
And about the Intake, the High Flow Filter, without the Air Box's Extra bend must be worth somthing. Sounds Nicer at least :) |
actually you would be surprised. The stock air box usually works better than the high flow filters mostly due to heat rejection and the large surface area.
|
ah i see. this ones got a Make Shift Heat Shield, nothin Special though.
|
Doing a T2 swap is entirely the more "logical" way to go about getting boost under your hood - anybody who says turbo'in the NA is better than the T2 motor for making power is crazy (sorry Vex if you're reading this :) )
I've done the swap and so have many others, so you'll have a wealth of knowledge on the swap. Only a handfull have done a turbo-NA and lived to write about it :) |
lol thanks for the info. But i've decided to build a All Motor Rotary. lol
Also did paint my S4 Rims lol Stock http://i252.photobucket.com/albums/h.../StockRims.jpg New'ish http://i252.photobucket.com/albums/h...tBlackRims.jpg |
Personally, building an all motor rotary is even harder than the 6pt, due to the fact that the porting, exhaust, engine management setup/ tuning, and engine assembly would preferrably need to be done by the same person, and compliment each other in order to achive the most gains, which can get quite expensive.
More things for N/A all motor setup: cooling mods oil mods rotor clearancing rotor lightening assembly ballance (rotors, e shaft, counterweights) huge porting new housings (not worth effort otherwise) custom tuned exhaust setup etc etc etc otherwise why bother? :D |
True True, but Nothing really Huge is gonna happen til i'm outta school. Weather it be a Turbo Swap, Turbo Build, or N/A Build. Only minor Things, which help Free up Ponys and make this Rotary More Reliable
|
Well, Painted my White Turbo hood Flat Black Primer for now lol. Still needs a bit more, but At Least Looks Better Than Before!
here are Pictures!! Before! http://i252.photobucket.com/albums/h...t/Rx7_fc_1.jpg http://i252.photobucket.com/albums/h...23t/Rx7_fc.jpg After! http://i252.photobucket.com/albums/h...kTurbohood.jpg http://i252.photobucket.com/albums/h...t/MazdaFC1.jpg http://i252.photobucket.com/albums/h...t/MazdaFC2.jpg |
why is it called snow drift? you going to be taking it to Atlanta Michigan for Sno*drift rally america event next season or something?
|
Watch that primer when it gets wet. If its the rattle can kind, it'll come off as dust over time all over your hands, etc.. lol.
|
Quote:
And Thanks for the info bout the Primer, i'll hurry and Finish the hood Soon! |
Just a One Picture Update This Time, New Rims!!!
http://i252.photobucket.com/albums/h.../NewWheels.jpg |
I like the new rims, but I was digging the blacked out look. Powdercoat those black!
|
I'm Thinkin about Getting the Insides coated black, but leaving the Lip Polished.
Got a Clutch Finally put in, Car Feels 10x Better Tomorrow i'm going to be Installing my Tokiko/Eibach Coil Combo. should get the better stance i'm lookin for Also Ordered Headlight conversions (H4), Front and Rear Upper Strut Bars, and Steering wheel and Detachable Hub. This Sevens Turning around! |
Well, Got the Coils installed. Not as Low as i was thinking, but still alot better than stock.
Enjoy http://i252.photobucket.com/albums/h.../FCTokiko1.jpg http://i252.photobucket.com/albums/h...t/FCTokiko.jpg |
| All times are GMT -5. The time now is 07:58 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Hosted by www.GotPlacement.com