1st gen vs 2nd gen
 

Hi guys, I do own a 90 RX7 w/ 13b streetported supercharged (blown) RB full exhaust, complete suspension from RB, turbo ll frt calipers, here is my question should I rebuild that motror or get my friend 84 rx7 bridge port for $ 3500

Rebuild.

1st gen vs 2nd gen
 

Thanks

U already have the car and the base, with the 3,500 you were going to spend on your freinds car rebuild and bridgeport your own engine.

http://www.zorly.com/images_corvette...7%20L%20V8.jpg

jussayin'

Nahhhhhhhh...

Buddy of mine bought one of those for ~$3500......... Full pull out too. Engine, tranny, PCM, everything for the swap including scored bearings, torn up cams, worn pistons, everything was included, except the additional $3000+ for the machine shop to make the block useable, then everything else on top of the swap.

I say rebuild, but just say no to bridgeporting

I say rebuild

Hey buddy, I stay out of the piston engine section....watch the LS crap in the rotary tech section....:toetap05:

oh and:
http://i377.photobucket.com/albums/o...te/ls1tard.jpg