Deals Gap -For sale thread
 

Guys, here is a thread to post what you might have for sale that you can bring to the gap with you. This is a good time to clean out some space and help other rotorheads with shipping.

Post the items you have for sale that will fit in the car with you:

I just bought a nice fender roller. I was thinking about bringing it and renting it out for $25 a car. Any interest?
I also have a RX7 store downpipe and a mid-pipe if anyone is interested.
I would like to buy a stock radio and a stock front lip. PM me.

Few Things I have. I'm At Work. So I might Add to this list tomorrow.

FC
88' 10Th Annv. Tail Lights $140
S4 Set Of Rotors in Good Condition $100 for the set
S4 Eccentric Shaft In Good Condition $50
S5 End and Center Plates $75 each

FD
re amemiya steering column gauge pod $80
Flyrx7 Center Speaker Gauge Pod. Never Used! Still wrapped. 52mm 4 pod $165
Stock Radiator about 2k miles on it $150
2 sets of stock twins. Set 1 in good condition. $150
Set 2 in very poor condition (bad cracks) $50
LIM (stock) $75
UIM (stock) $75

Non Car Things
Guitar Hero Drum Set and Guitar for Xbox 360 $40
PS2 Racing Wheel and pedals $15
Paintball Mask New Condition (I'll update later which one) $20
Paintball High Pressure tank New Condition $100
Paintball Gloves and Tournament Clothing New Condition$25

FC headlight assemblies
S5 rear wing (white)
Apexi N1 Evo Catback
Corbeau reclining seats
FC coils- leading and trailing
CAS
Autometer 60mm turbo boost gauge with pod and demister mount
S5 mirrors (white)
Logicon
Idiot cluster

93 mb rx-7, $10k, interesting trades considered
:<

Also if anyone wants a poor man's HID kit, plug and play for the 3rd gen $5 http://rotarycarclub.com/rotary_foru...ad.php?t=10986

WTB: FC passenger side window switch.

I need a L/S power mirror cover thingy for a 2nd gen. (the thing on the inside of the car that covers the nuts) I think it may be called a sail panel.

I'm in need of shifter boots for an FC.
I need the inner rubber boot and the outer leather boot.
(I'm not sure what else to call them.)

I'll bring you the outer (S5 right?) I don't have the inner boots though. "New" leather replacement, bought the wrong Item as I have S4. It's been packed in a box for a couple of years so you might have to oil it up or something to get any wrinkles or creases out. $5

I have both left an right side ones, black in color.
Left side one is cracked in half though, sort of still intact, needs gluing.
Free.

Cool thanks.


BTW: I literally have a whole car of parts from a 87 gxl and 89 gtu.
So ask for anything an you shall receive, (unless I want to keep said part, and if said part will fit in my rx7).

I'll be bringing my Viton check valves, I don't have many sets in stock, just re-ordered today but I won't get the new order in time for the trip. But, anyone at the event can buy at the hookup price of $10 for a set of 4 and I'll ship them out.

I'll be giving one set for raffling off as well :).

I'll probably be digging through my stuff and bringing a few neat things for sale with me.

Dale

Ive got one block I might be willing to let go.
Its in pieces, and not pretty.
Its an S5 n/a, coolant seal track failure.

Condition:
Front iron: (Inner track rust-through to coolant passage), some pitting on the face, I also practice ported on that iron, also with a practice bridge port.

Front housing: A little bit of flaking on inside edges, lots of pitting on the outside, oil injector hole stripped, mating surfaces pitted, exhaust sleeve removed, I ported it too.

Front Rotor: Pitting on most sides, side seals stuck in, one corner seal stuck in, bearing good.

Intermediate Iron: Some pitting on front face, rear face good, I did small chamfer/bevel porting on top edge of ports.

Rear housing: Lots of flaking on inside edges, not as badly pitted on outside, oil injector hole might be stripped, exhaust sleeve removed, stock port.

Rear Rotor: Good.
Rear housing: Good, stock ports.

Eccentric shaft: Good.
Ive got all the hardware an front end parts, oil pan too.
No flywheel.

I want to make a cheap experimental crappy motor out of it.
Its still in process, but not going to be finished any time soon.

So make me an offer I cant refuse. :lol:

I have a ton of stuff for sale. Too much to list here so click this

http://rotarycarclub.com/rotary_foru...?t=5460&page=5

I`ll bring some Fc and Fd parts, I`ll post some tape on the back window of my car, Saying I have parts for sale.

It would be really cool if there was an area that people could meet to buy/sell.
Our own Rotary Swap meet area, how cool would that be.