Rotary Car Club

Rotary Car Club (https://rotarycarclub.com/index.php)
-   1st Gen RX-7 Parting Out (https://rotarycarclub.com/forumdisplay.php?f=196)
-   -   Gauging Interest in Part-Out (https://rotarycarclub.com/showthread.php?t=11117)

spankle my wankle 04-23-2010 05:06 PM

Gauging Interest in Part-Out
 
5 Attachment(s)
I was recently hit by a drunk driver and the insurance company is totaling my seven. They haven't told me yet how much they think it is worth (very low number im assuming) and how much they want for salvage value. So I'd like to get an idea on if it would be better to just part it out and scrap the rest or put in a "fake" motor and let them keep it. Its an 85GS so if you'd like something just post or pm what you'd be interested in (no prices yet) and if enough is wanted ill just salvage it and part it out.
Here is a list of what is new on the vehicle:
3k miles on a 12A with 3rd gen corner seals for better durability
Calipers (6k miles)
Tie rod ends (about 9k miles)
Brake master cylinder (about 6k miles on it)
left rear wheel cylinder (less than 100 miles on it)
Starter (3k miles)
Pitman Arm (0 miles as it hadn't been installed yet)


I'd also be interested in selling it "as is" as it does run fine just lots of damage to the rear and the exhaust broke in half somehow.

85'12a-Blake 04-24-2010 05:25 AM

how much would u be askin 4 the motor? also if anyway possible an ignitor off the distributor preferably the lead ignitor. Also since you got the newer corner seals, does tht mean u had the motor completely rebuilt or just the seals changed?

spankle my wankle 04-24-2010 11:08 AM

motor was completely rebuilt, new apex and corner seals from rotary atkins, all oil rings and gaskets are new as well. I'd prob sell it for $550 including starter, $500 w/out it. Igniters are gold so $35 a piece.

85'12a-Blake 04-24-2010 07:23 PM

do you know what the compression is on all 6 sides? Also who did the rebuild? Has the insurance decided on how much its worth bc i mite be interested in the whole bc i need brakes also is ur canter console cracked at all bc if not i'll definately buy it

spankle my wankle 04-25-2010 06:26 PM

ill have to borrow a compression tester for that. It was built by one of the owners of C&C motors. He has a red REPU and about 4 other rx7s. He gets on here sometimes i think his name on here is REPUCharles. Insurance hasnt gotten back yet but ill post when they do.

patmac6075 04-25-2010 09:19 PM

Rear end
 
Might be interested in the rear end...the car is a GSL...right? Discs in rear?
Also I live in Wisconsin....where are you?

djmtsu 04-26-2010 06:48 AM

GS, it has drums in the rear.

spankle my wankle 04-26-2010 05:52 PM

^ correct...i live in la vergne tn

spankle my wankle 04-28-2010 08:01 PM

insurance came back and i will salvage the car.

85'12a-Blake 04-28-2010 08:12 PM

I have a Question. Is your center dash panel in 1 peice with no cracks and an even surface? The panel peice around the radio and A/c.

spankle my wankle 04-29-2010 06:20 AM

the surface is fine, it is cracked on one side.

85'12a-Blake 04-30-2010 12:08 AM

well my motor locked down 2nite after work so if 2moro i find out if it was the starter. if not you'll probly be hearing from me. so hopefully it isnt gone yet.

spankle my wankle 04-30-2010 12:22 AM

^ im working on a trade with someone right now...but let me know whats up with your motor and ill keep you posted.

85'12a-Blake 04-30-2010 12:30 AM

ok then i'm hopin its the starter but i was sittin there idling and something poped and it seized......i try and start it and it just clicks once

spankle my wankle 04-30-2010 10:10 AM

if it was already idling then its not your starter.....


All times are GMT -5. The time now is 12:15 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Hosted by www.GotPlacement.com