Replace the oil returm line with JIC fittings and braded line
 

I made this set for a customer to replace the stock oil return line .The price will be set at $25 per part .The flange is EDM cut 3/8 steel and the JIC fitting is brazed in and the flange is counter bored for better flow .

Finally!! Answers to my nightmare when I install turbos.

David, I'm definitely wanting these!!! Please sign me up for 2 sets!

I will make them asap

Awesome!

per part - or per set of 2?

per part... set would be $50.

That is correct each fitting is $25 ,a stock motor with twins will need four fittings to replace both return lines .The customer that has the first set said he will post a write up on this .

I need only one, Am going to a single. Whats your Paypal.

Paypal is garfinklemw@gmail.com Shipping by USmail is $5 pey pal is $.90

Sending it through now $31.00

Shipped today and thank you

What size AN fittings would you use to make the oil lines for these fittings?

# 8

Can you do something like this for the series 5 FC?

I will need to have a stock gasket to see if it is the same as FD.If it is not the same then I would need to write a new set of programes to cut the plate on the EDM .