Rotary Car Club

Rotary Car Club (https://rotarycarclub.com/index.php)
-   RX-7 3rd Gen Specific (1993-2002) (https://rotarycarclub.com/forumdisplay.php?f=36)
-   -   What underpan are you running with FMIC (https://rotarycarclub.com/showthread.php?t=1421)

Proxy One 04-01-2008 01:50 PM

What underpan are you running with FMIC
 
I am just seeing what people are running for a underpan with FMIC. I have a Blitz FMIC and I tried to test fit the stock underpan last night, well look like it wont fit due to the radiator being too low. Any suggestions?

l8r

DMoneyRx-7 04-01-2008 02:28 PM

you are supposed to cut and trim the stock undertray for it to fit.

Herblenny 04-01-2008 07:32 PM

try 99 under tray

Proxy One 04-01-2008 07:43 PM

Well i have both the 94 and the 99+ underpan so if I cut one up im gonna start with the 94 pan since im not doing the 99 bumper till later this month more than likely. I figured this is pretty much what Id have to do just cut the stock one up a bit.

l8r

albertomg 04-03-2008 05:52 PM

too low? you sure you got everything mounted correctly?

goodfella is running that same IC and i believe he is running the stock undertray.

Proxy One 04-03-2008 10:35 PM

Ill look at it again but its pretty tight with the new brackets on the radiator.

cewrx7r1 04-03-2008 11:32 PM

You have to remove the piece rivited to the main body.


All times are GMT -5. The time now is 08:36 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Hosted by www.GotPlacement.com