Rotary Car Club

Rotary Car Club (https://rotarycarclub.com/index.php)
-   RX-7 1st Gen Specific (1979-85) (https://rotarycarclub.com/forumdisplay.php?f=38)
-   -   Fuel line sizing (https://rotarycarclub.com/showthread.php?t=14500)

Waffles 07-28-2011 08:15 AM

Fuel line sizing
 
So i am working on getting my bridgeport 12a in, and forgot to account for one thing. The factory fuel hard lined(feed and return) are TINY. I am planning on switching to woven pushlock feed, and switching the OE feed line to a return line. With the setup below, what would a good fuel line size be? I am thinking -8 should be fine, but my experience with rotary fuel systems is small.


Setup:
12a bridgeport
RB Holley intake
Holley 650
140 GPH pump

730RWHP12A 08-08-2011 10:45 AM

1/2" feed and return line will be more than enough.you can buy a roll of 1/2 aluminum hardline from jegs for about $40.00. enough to do your car....
you cant go too big on your fuel system though , so if you wanna do -8 then go ahead...


All times are GMT -5. The time now is 08:14 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Hosted by www.GotPlacement.com