Rotary Car Club

Rotary Car Club (https://rotarycarclub.com/index.php)
-   3rd Gen RX-7 Engine Parts (https://rotarycarclub.com/forumdisplay.php?f=6)
-   -   FS (VA) - ARC Super Titanium Exhaust, BNR S3's, "Axiom" Solenoids, Hi-flow cat, etc. (https://rotarycarclub.com/showthread.php?t=15127)

Fendamonky 12-20-2011 12:46 PM

FS (VA) - ARC Super Titanium Exhaust, BNR S3's, "Axiom" Solenoids, Hi-flow cat, etc.
 
Hey guys,

So It's winter time, and about time I cleaned out my garage of bits and pieces that I no longer use.. All prices DO NOT include shipping unless specified! All items are available for shipping to the lower 48 states, unless I specify local pick-up.

(Mods please let me know if links to the "other" site are prohibited... I've got them in there for informative/selling purposes only)

Up for sale:

- ARC Super Titanium Exhaust - $1,000
I'm selling this because I moved on to a 4" turbo-back exhaust setup and wanted to share the opportunity to own this great exhaust with another enthusiast. Please see hyperlink for original FS thread as posted by Purerx7/Rx7Boutique.

Exhaust on the dyno at PFS in 2010:





- BNR Stage 3 (sequential) Twin Turbos - $1,200 (Sold)
These have been used, but are still in good condition. There is slight cracking on the middle portion of where the turbo mounts to the stock manifold. I've been told that this is fairly common and nothing to be concerned with though. **These turbo's come with a 99-spec Y-pipe that has been modified to fit, I will not sell them separately**

- "Axiom" Rob Bailey Solenoid set - $400 (Sold)
These are THE solenoids to use if you're still running twins, made orignially by Saxyman990. This comes with a mounting bracket and labeled hoses attached. I can also mail the original installation pdf, though it should (now) be posted in the 3rd Gen FAQ thread. Once these things are properly installed you WILL be able to fully maximize your sequential twins to their full potential without any of the problems normally seen in twins. I was running my BNR's at 17-18psi all day, every day, and I didn't have any problems what-so-ever after installing the solenoids!

Original thread on them: http://www.rx7club.com/showthread.ph...light=Solenoid

http://i281.photobucket.com/albums/k...915_155801.jpg

- Fluidyne Radiator - $200
Mechanically this is in perfect working order. There is a slight red overspray on the bottom end-tank from a (less than perfect) Maaco paint job after I purchased the car. It's not visible though.

- Hi-Flow Cat w/ Airpump feed - $275
Cat is in good working order, I removed it from my car shortly after purchase since I was not required to run a cat in England.

- 3" Downpipe w/ WBO2 bung - $150

- MS GT-C style Sideskirts - $300
I'd prefer local pick-up on these. They are replica GT-C sideskirts that I purchased from Dragon Performance in England, then I decided to go a different direction but kept the skirts around. These have never been installed, however they do fit up fine from what I remember, mild modifications and sanding could possibly be needed, but that's to be expected.

I have more to sell, I just haven't decided on pricing yet. I will add items as I decide on prices, and post pictures as I take them.

Thanks,

Levi

yzf-r1 12-20-2011 01:37 PM

Any pics of the turbos off the car? How many miles on them? Were they purchased new from Bryan? What year?

Fendamonky 12-20-2011 01:49 PM

Quote:

Originally Posted by yzf-r1 (Post 176062)
Any pics of the turbos off the car? How many miles on them? Were they purchased new from Bryan? What year?

I don't have any pics yet (I still need to clean them), but I will be posting them up. I purchased them from Bryan (by way of Jason at rx7store, he was worse than useless though, so I just communicated directly with Bryan at the end for them).

I bought them in early 2008. I'll have to check my old receipts to see if mileage is listed for when I installed them and had it tuned. I want to say they have no more than 10-15k on them though since my car was in storage for at least a year, and they came out last September.

Fendamonky 12-23-2011 08:28 PM

Update...


Sold Items:


- BNR Stage 3 (sequential) twin Turbos - $1,200 Sold

- "Axiom" Rob Bailey Solenoid set - $400 Sold

Still for Sale:

- ARC Super Titanium Exhaust (single tip) - $1,000
The rivets holding the "ARC" tap on fell off, so unfortunately that's gone. The exhaust still functions and sounds perfectly fine though..

http://i60.photobucket.com/albums/h3...-10-43_522.jpg

http://i60.photobucket.com/albums/h3...-15-36_316.jpg

http://i60.photobucket.com/albums/h3...-15-58_567.jpg



- Koyo Radiator - $200
*I hadn't looked at this in a while when I posted it up for sale.. It's actually a Koyo* Mechanically this is in perfect working order.

http://i60.photobucket.com/albums/h3...-17-53_316.jpg

http://i60.photobucket.com/albums/h3...-17-37_232.jpg

- Hi-Flow Cat w/ Airpump feed - $275
Cat is in good working order, I removed it from my car shortly after purchase since I was not required to run a cat in England.

http://i60.photobucket.com/albums/h3...-06-22_509.jpg

http://i60.photobucket.com/albums/h3...-06-40_601.jpg

http://i60.photobucket.com/albums/h3...-06-52_199.jpg

- 3" Downpipe w/ WBO2 bung and plug - $150

- 3" Midpipe - $100
It's been extended slightly to allow catback tips to protrude beyond the bumper so that the flames won't burn your paint (ask me how I discovered this is a problem... lol)

http://i60.photobucket.com/albums/h3...7-08-48_99.jpg

http://i60.photobucket.com/albums/h3...-08-26_168.jpg


- GReddy Intake - $200
A couple broken fins on the filter element, they are purely cosmetic and can be turned downwards.

http://i60.photobucket.com/albums/h3...13-51-53_9.jpg



- MS GT-C style Sideskirts - $300
I'd prefer local pick-up on these.


- Engine mounts - $150 for the pair
Stock mounts in VERY good condition. Complete, clean, and ready to bolt in.

http://i60.photobucket.com/albums/h3...-11-27_209.jpg

http://i60.photobucket.com/albums/h3...7-11-55_21.jpg

Thanks,

Levi


All times are GMT -5. The time now is 05:44 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Hosted by www.GotPlacement.com