![]() |
another noob question about battery
so im working on my car last night and hooked up battery backwords for a split second, and then put it in the right way but now i have no power any were but all my fusses checked out not blown, but when i put battery on the charger it just says check battery, and also i can jump the car and it starts.. question is will hooking up a brand new battery wrong for a split second fry the battery
|
By checked out, do you mean visually? If you didn't use a multimeter, try using the resistance (ohm) setting and see if there's continuity. I doubt there is.
|
yes i have only visually checkd fusses i will check ohm
|
Quote:
|
When I did this before the 80A main fuse blew. It has 2 or 3 bolts holding it on, they are on the sides under the little flaps.
|
Replace your alternator.... chances are you cooked that
|
its just a single top post cheapo from schwabs i took the battery and had it tested at schucks and it said it was toast. and also i do need to replace the alt its got some much belt dust inside it, why do these belts streach so fast its a brand new belt and the adjustment is maxed out and still loose.
|
Your over tightening the belt.
|
cheap belt? try a gates brand belt.
|
My bet is underdrive pulley so you've actually got the wrong size belt
|
All times are GMT -5. The time now is 02:41 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Hosted by www.GotPlacement.com