WTB (buy/borrow): TII hood
 

I'm looking for a TII hood to buy or borrow for a short period of time. Color and paint condition doesn't matter as long as the hood is structurally sound (i.e. no large amounts of rust, huge dents, missing pieces, etc.). I'm in SW OH about 20 min. north of Cinci and am more than willing to drive about two hours in any direction (Indy, Louisville, Lexington, Dayton, Findlay/Lima, Columbus, etc.). I'm trying to see if I can utilize the stock hoodscoop location as a cool air source for the ITB's on my N/A 13B. Alternatively if someone could provide detailed dimensions that would work as well.

One more for the road...

I have a CF TII "style" hood. I could make some measurments for you if you want. I live In FL so I cant loan it to you.

If it's the same dimensions/design as the OEM TII hood I'm trying to figure out where the "opening" on the inside is located relative to the sides of the hood, more specifically the rear and sides. I know the hood isn't exactly square but if you could measure the distances from both sides and the distances of the front and rear of the opening to the back of the hood. Alternatively is you have the stock TMIC still in there you could measure its location relative to the sides of the engine bay. That might work even better actually.

On another note who makes your CF hood and do you like it? If I can't find a decent OEM one I'll probably pick up an aftermarket CF or FG one (preferably FG since it'll be painted).

My hood is a eBay knock off. I wouldn't recommend it. I will get you some measurements in a few days