Rotary Car Club

Rotary Car Club (https://rotarycarclub.com/index.php)
-   3rd Gen RX-7 Engine Parts (https://rotarycarclub.com/forumdisplay.php?f=6)
-   -   Freshly Rebuilt 500cc and 850cc Injectors (https://rotarycarclub.com/showthread.php?t=1702)

IR Performance 04-12-2008 05:52 PM

Freshly Rebuilt 500cc and 850cc Injectors
 
We have a few pairs of these left. They are are freshly rebuilt with new o-rings and pintle caps. They have been cleaned, flow tested, and matched in pairs. $105 shipped per pair.

IR Performance 04-12-2008 09:24 PM

Its always a good idea to replace injectors with a known good and tested set when performing a rebuild. These cars emit a tremendous amount of under hood heat and injectors fail.

manveru 04-13-2008 02:29 PM

850's fit in the primary if you shave an 1/8" off the top of the rail right? if so, i'll grab a set of 850s.

IR Performance 04-14-2008 01:29 PM

Yes the rail can be milled to accept the primaries.

IR Performance 04-29-2008 09:52 AM

I have only a few sets left. Trying to clear out some inventory.

D4rw1n 05-13-2008 09:33 PM

I will take a pair of 550's

IR Performance 05-14-2008 05:00 PM

$105 shipped. Paypal is at ihorhuk@optonline.net

Phoenix7 05-14-2008 05:28 PM

Do you have any FC S5 TII injectors? 720cc, 750cc or up to 850cc?

IR Performance 05-20-2008 09:49 AM

We normally don't carry 2nd gen parts, but If you send them to me I can rebuild them.

Phoenix7 05-20-2008 12:47 PM

ok. Good to know. I'll send them your way when they're out (most likely going to do my NA injectors once i get the TII doing the DD work.)

IR Performance 05-29-2008 11:01 PM

Cool, let me know.

TRISPEEDFD3S 06-07-2008 03:14 AM

Ihor do you normally carry these? In about a month I will need a set of 550s and a set of 850s. $210 shipped yes?

IR Performance 06-07-2008 10:23 AM

Depends on whether or not cores are available. Right now I only have 1 pair of 550s and 850s.

Mobius 06-08-2008 02:04 PM

Are you willing to ship the 550's to Canada? It's quite cheap already, but any discount for providing cores?

IR Performance 06-09-2008 10:21 AM

Pmed you


All times are GMT -5. The time now is 12:58 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Hosted by www.GotPlacement.com