Griffith Performance Engineering FD3S Rx-7 Custom Seat Mounts Bases
 

These seat mounts can either accommodate Sparco/Recaro/etc seat rails or aftermarket seats with bottom mount base configurations. Additionally the seat mounts come with accommodations for 5/6th point racing sub-harness attachment points as well as OEM seat belt latch relocation bracket so you can still use your OEM seat belts.

Pricing starts at $165 each (left or right) or $300 per pair if 10 people sign-up and put $100 deposit. If I can get 20 people signed up pricing will be $140 each or $260 per pair. Note shipping is not included.

If you want non adjustable racing seat mounts see my other seat mount GB post. Tall racer do apply.

If you're serious about getting one or a pair send $100 deposit to PayPal Account: afgmoto1978@gmail.com, state what you want (left, right, pair and if you want OE seat belt latch bracket ($25 each)).

I will be setting the deadline to March 7th for the deposits. The seat mounts should be ready to ship by April 18th

http://rotarycarclub.com/rotary_foru...1&d=1392702021

http://rotarycarclub.com/rotary_foru...1&d=1392704240

edit

Photographs of original prototype with Bride Low Max Seats

More Prototype Photos

Deposit sent.

Bigger pics because sometimes they take a while to load....

http://rotarycarclub.com/rotary_foru...0&d=1392775937

http://rotarycarclub.com/rotary_foru...1&d=1392775937

http://rotarycarclub.com/rotary_foru...2&d=1392775937

http://rotarycarclub.com/rotary_foru...3&d=1392775937

http://rotarycarclub.com/rotary_foru...4&d=1392775937

http://rotarycarclub.com/rotary_foru...5&d=1392775937

http://rotarycarclub.com/rotary_foru...6&d=1392775937

http://rotarycarclub.com/rotary_foru...7&d=1392775937

http://rotarycarclub.com/rotary_foru...8&d=1392775937

http://rotarycarclub.com/rotary_foru...9&d=1392775937

So this is how they're still made? They look like one-piece in the CAD drawings I saw before. And I didn't realize you could use reclining seats with them. Not to mention it looks like these Bride's fit without modifying the shoulder bolster like on the Evo2s. Interesting.

I keep forgetting to send a deposit for these lol.

EDIT: Just sent the deposit.

Eric, I have three different seat mount designs, this design allows for a seat rail, spraco/evo side mount plates or bottom mount seats like the Low Max pictured. The other designs are for racing seats only.

Oh OK, gotcha. So which one did I put a deposit on? lol

Got you covered