Rotary Car Club - FC clutch slave thread size?

Rotary Car Club (https://rotarycarclub.com/index.php)

- RX-7 2nd Gen Specific (1986-92) (https://rotarycarclub.com/forumdisplay.php?f=37)

- - FC clutch slave thread size? (https://rotarycarclub.com/showthread.php?t=18340)

C. Ludwig

08-30-2014 06:39 PM

FC clutch slave thread size?

Can anyone check the thread size on the hydraulic fitting on an FC slave, please? TIA!

Dannobre

08-30-2014 07:14 PM

Not M10X1 like a lot of the others??

C. Ludwig

08-31-2014 11:52 AM

Nope. It's larger.

RETed

08-31-2014 03:45 PM

The fitting on the clutch slave cylinder to the clutch slave flex hose?
The one that uses a 17mm hex fitting to remove and install?
BTW, this is for a TURBO model...

I just eyeballed it, and it does look like a 10mm fine thread, or 10mm x 1.0.
The 10mm I got using a ruler.
I can confirm in a few hours, as I don't have my fastener measuring tools with me right now...

-Ted

C. Ludwig

08-31-2014 06:00 PM

Yes. Maybe it is 10mm. Thought it was larger. Turbo and NA use the same hose, so either one will give the proper measurement.

RETed

09-01-2014 04:23 AM

Confirmed.
10mm x 1.00

-Ted

C. Ludwig

09-01-2014 07:04 AM

Thanks Dannobre and Ted!

All times are GMT -5. The time now is 06:46 PM.