Rotary Car Club

Rotary Car Club (https://rotarycarclub.com/index.php)
-   RX-7 1st Gen Specific (1979-85) (https://rotarycarclub.com/forumdisplay.php?f=38)
-   -   GSL-SE fuel pump flow? (https://rotarycarclub.com/showthread.php?t=1975)

PercentSevenC 04-26-2008 12:01 PM

GSL-SE fuel pump flow?
 
Anyone know what the GSL-SE fuel pump's flow rating is? To cut costs I was thinking of using one on my blow-through project for the time being.

Jeff20B 04-28-2008 02:15 PM

Don't they flow at least as much as a walbro 255lph? C'mon guys. Anyone know?

WE3RX7 04-28-2008 04:09 PM

I dont think they'd match the 255lph. I'd imagine they are closer to the S4 NA 13B pump which is less than 255 - I used to have a chart somewhere...

Either way, it wont do for much more than 6psi I'd imagine...

BadAzz84 04-28-2008 10:03 PM

gsl-se pump will work fine for a blow through turbo they put out like a max of 40psi

PercentSevenC 04-28-2008 10:59 PM

It's not the pressure I'm concerned about; I know that will be plenty. I'm concerned about how much fuel it will flow at lower pressures, like around 15 PSI. I think it needs to be like 30-35 GPH at that pressure.

Jeff20B 04-30-2008 03:59 PM

Does anyone know? You might want to ask on the other forum. It's important because I found a GSL-SE pump for you. I'm working out price right now.

BadAzz84 04-30-2008 08:09 PM

Well before i went turbo on my 12a i was told that that pump would be great for blow through. i couldn't find one so i got a msd 2225 works great.

Jeff20B 04-30-2008 09:40 PM

Thanks for the info.

PercentSevenC 04-30-2008 11:47 PM

Yeah, I was thinking about using a Summit-rebranded MSD 2225 as well. I think the GSL-SE pump should probably be enough for now, too, so it'll come down to what I can find when the time comes.

BadAzz84 05-01-2008 09:48 AM

Should work either way guess you could use a wolboro.

Jeff20B 05-01-2008 12:30 PM

You could use the GSL-SE pump while you're running 5 psi. You're looking for cheap solutions and this is it. :)

nobodymv 05-25-2008 09:05 PM

After research, I FINALLY found the answer to the original question:

Specifications:
Design: Intank
Flow: 160LPH
Minimum Voltage: 12V
Max Operating Pressure: 95 PSI
Part Number: SPPG-392

It is the same part for:

1986-1989 Acura Integra
1990-1992 Daihatsu Rocky
1984-1985 Mazda RX-7

I hope this helps you !

Jeff20B 05-25-2008 11:14 PM

The GSL-SE pump is external. Your list states Intank.

nobodymv 10-13-2008 10:04 PM

Quote:

Originally Posted by Jeff20B (Post 21617)
You could use the GSL-SE pump while you're running 5 psi. You're looking for cheap solutions and this is it. :)



Go to your local Dodge dealer and have a look at the fuel pump that they use for the viper. It’s a Bosche pump that is identical to the HKS upgrade pump. One of my guys picked one up and put it in his car and the pump only cost about $130. Check it out.

PercentSevenC 10-13-2008 10:53 PM

I ended up picking up an MSD pump for like $40. But, good to know. Is it an external pump?


All times are GMT -5. The time now is 01:21 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Hosted by www.GotPlacement.com