FD Air pump Deletion Idler (Interest feeler)
 

- Remove your air pump and still have full belt contact with water pump
- Idler will have a CNC cut Aluminum pulley with a double row sealed bearing rated at 12000RPM

The brackets and the shaft are steel. The shaft can be adjusted forward and back for belt alignment with belt adjustment being the same as stock with the stock sized belt. Single turbo applications may use a smaller belt which will allow the idle to tuck closer to the motor.

Pricing will be based on interest.

http://img2.putfile.com/thumb/4/11801341785.jpghttp://img2.putfile.com/thumb/4/11801341749.jpg
http://img2.putfile.com/thumb/4/11801341713.jpghttp://img2.putfile.com/thumb/4/11801341792.jpg
http://img2.putfile.com/thumb/4/11801341757.jpghttp://img2.putfile.com/thumb/4/11801341723.jpg
http://img2.putfile.com/thumb/4/11801341764.jpghttp://img2.putfile.com/thumb/4/11801341719.jpg

I'm in and will start the list.

1. Blwnrtr93
2. CP1
3. Surfmon
4. Herblenny
5. Proxy One

David showed me this at DGRR ... Impressive Craftsmanship :) ... great job !!

Im in! depending on price though... i would be willing to spend $150 MAX otherwise it is actually worth my time to make it myself!

(i am a machinist in a full service machine shop)

i'm interested as well

Cp1 Start making yours , the bearing is over $ 50 and the pulley cnc cut will be more than it will cost you to do your own for sure .Chadwicks unit may be less than $ 150 .Please check with him ,his unit is different but is well made .

I'm in!

I have some of the brackets made and the shafts cut .I am still price shopping the pulley to be cnc cut .

Count me in too, depending on the price though.

I'm very curious of the price too...

Unless someone cuts the pulley for less than the prices I have ,the cost will be $ 200 with SS bolts .I am looking for a less expensive pulley before ordering them .

Still interested. And since the car's going into storage for the winter soon....still waiting.

I will try to find a shop to cut the pullies soon ,now that I have moved to the new house and bigger shop .

Garfinkle have you tried WWW.Pulleyboyes.com talk to Chris on what you have to do to get a quote..

Dan

Im in ..