Rotary Car Club

Rotary Car Club (https://rotarycarclub.com/index.php)
-   20B/3 Rotor Conversion.. (https://rotarycarclub.com/forumdisplay.php?f=132)
-   -   20B Eshaft Pullers -Pics- (https://rotarycarclub.com/showthread.php?t=2124)

Herblenny 05-06-2008 08:43 AM

20B Eshaft Pullers -Pics-
 
4 Attachment(s)
I thought I post it here..

Here are what 20B Eshaft Pullers look like..

Home Made Puller

http://www.rotarycarclub.com/attachm...1&d=1210081295

http://www.rotarycarclub.com/attachm...1&d=1210081303

http://www.rotarycarclub.com/attachm...1&d=1210081310

http://www.rotarycarclub.com/attachm...1&d=1210081320

Herblenny 05-06-2008 08:45 AM

2 Attachment(s)
Mazda Special Tool!

http://www.rotarycarclub.com/attachm...1&d=1210081474

Inside
http://www.rotarycarclub.com/attachm...1&d=1210081438

BLK FC3S 05-06-2008 09:40 AM

NICE! I might have to borrow that from you one day.

tom93r1 05-06-2008 12:15 PM

very creative! And alot less $$ than the Mazda tool.

To_Slow 05-08-2008 08:00 PM

Quote:

Originally Posted by Herblenny (Post 22446)

That looks like Carlos Lopez e-shaft puller. Nice pice. Well worth the money.

AHarada 05-08-2008 08:31 PM

Nice work.

What exactly is this used for?

HellBent 05-09-2008 03:16 AM

PULLING OUT THE ECCENTRIC would be my guess, since its a ECCENTRIC SHAFT PULLER

jtbshaw 05-20-2008 05:11 PM

Quote:

Originally Posted by RotaryResurrection (Post 23389)
< butthead> uh huh huh, he said "shaft puller", huh huh huh < /butthead>

that's funny! :lol:

Prometheus 09-03-2008 07:35 PM

Jesus, I wish I had one of those a last weekend.

I had to use a pry bar (that I wrapped with a rag many times, to be sure not to gnar the lobe) and a piece of Teflon between the side plate (to crush/ cushion) tha back side of the pry bar.

with some penetrating oil and no tapping with a hammer, the lobe simply slid off with adequate pressure applied to the pry bar.

I was surprised on how easy the lobe came off.

I did this on 3 20B blocks and there was no damage.


All times are GMT -5. The time now is 09:24 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Hosted by www.GotPlacement.com