new light lenses ayone?????
 

ok here is what I have right now in stock for reproduction lenese

69-77
R100 Rx2 REPU side marker light lenses {clear,red & amber}
79-80
clear front bumper lenses {clear only @ this time}
81-85
front bumper {clear only @ this time}

79-85
Front side marker lenses {clear only @ this time}


Working on
R100 REPU and late model Rx3 front bumper lenses
86-88 S4 bumper lenses in clear

tail lights for the Rx3 and Rx2..


any other plastic ideas????

Dan

anything for a cosmo? (i know, the things rare but just worth asking!)

clear items for the FC would certainly sell

I would not forget about the Cosmo as that is what Dad drives..
these are amber lenses and are also the same ones that we put on dad's Cosmo a few years back..


76-78 Cosmo front bumper 50.00 shipped for the set..

Dan

FTP Lenses...?

All I have on the FTP lenses are the USDM ones or JDM ones..
the US ones were about 85.00 a side last I looked and the JDM ones are about 220.00 a set...

Dan

Clear markers for the FC? The ones on the fenders and rear 1/4 panels?

I'd love to see the taillights you've made for the older cars though.

Click on the link and it will take you to a section on my E-bay store where the side marker lenses are for the REPU and the Cosmo Front bumper lenses
http://stores.ebay.com/AtkinsRotary_...QQftidZ2QQtZkm

Dan

I don't know how will this will show up but here is the sample lenses I got the the S4 front bumper..

Looks good! Clear side markers for FCs would be great, I have a set on now but need a back-up if one ever breaks. The thing that sucks is that S5 markers are different sizes, not sure about S4s...

so are you saying the that the fender lenses are different sizes on the S4 and S5 models??
I know the front bumper ones are..

Dan

Yeah, they are, I have a picture of the front and rears off my S5 next to each other somewhere, I'll try to dig it up. I'm pretty sure the S4s are the same size though. When I got mine from CorkSport years ago they were from D.SPEED/Japan and both sets were marked "Front Side". I actually had to trim out the mount holes a bit to get the rears to fit...

It would be great if you could get these made again, I get asked about mine all the time!




Edit: Can't find the pic I wanted but did find these...

http://i4.photobucket.com/albums/y12...arlenses01.jpg

http://i4.photobucket.com/albums/y12...rlenses002.jpg

I also found this page on D.SPEED's website, it looks like the turn signals and front sides are discontinued but the rear ones are still available?

http://translate.google.com/translat...PEED%26hl%3Den

Click "winker lenz" on the left side of the page...