***F/S: Aftermarket/Stock: Fuel Systems, PFC, FMIC, Single-turbo Kit, '99 Y-pipe***
 

Hi,

I have a LOT of parts for sale. In an effort to clear everything out, I've reduced prices on just about everything. Also, just about EVERYTHING is "Best 'Reasonable' Offer"! I've attempted to make the thread easier to navigate by not linking/posting too many pictures. Just contact me and I'll promptly send them over...


Anyways, I'm Paypal verified with over 150+ transactions under my belt. Paypal is the preferred payment method, but I'll accept MO/Cashier's Checks if you're willing to wait for them to clear. Paypal address is str8ryd@aol.com. If you have ANY additional questions PLEASE PLEASE PM me with them. I don’t like to clutter my thread so it would be HIGHLY appreciated. Please also don’t thread jack or crap. Thanks!!!!!


Thanks,
Rizwan


P.S. Shipping on ALL parts is additional as well as the 3.5% Paypal fees. I've also broken down the parts list in to categories to make it easier to navigate. Hopefully, it makes it easier...:icon_tup:







*Aftermarket Items:: Engine*





1.~~COMPLETE Fuel System: Includes KG Primary Rail w/720cc top-feed injectors, RX7 store secondary rail w/1680cc top-feed injectors, Sard Fuel pressure regulator, fuel pressure gauge, injector harness' already modified with proper resistors, all braided/stainless steel fuel lines with AN- fittings, and a Brand NEW Walbro 255lph Fuel pump (All components with 1000 miles or less): $750 + shipping

http://i65.photobucket.com/albums/h2...d/DSC03743.jpg
http://i65.photobucket.com/albums/h2...d/DSC03744.jpg
http://i65.photobucket.com/albums/h2...d/DSC03745.jpg
http://i65.photobucket.com/albums/h2...d/DSC03746.jpg



2.~~Incomplete Fuel System: Includes KG Primary Rail, Rotary Extreme Secondary rail, Sard Fuel pressure regulator, fuel pressure gauge, and all stainless steel fuel lines and AN- fittings: $450 + shipping

http://i65.photobucket.com/albums/h2...d/DSC03747.jpg
http://i65.photobucket.com/albums/h2...d/DSC03749.jpg
http://i65.photobucket.com/albums/h2...d/DSC03750.jpg




3.~~NEW Burnout Rear Steel Fender Flares: This is a brand new set: $500 + shipping

http://i65.photobucket.com/albums/h2...d/Flares_2.jpg
http://i65.photobucket.com/albums/h2...d/Flares_1.jpg



4.~~Polished Greddy 2-row FMIC w/Tial BOV and polished piping with couplers and spring-loaded clamps: This is the more expensive v-spec core. I had the ends and top of the Intercooler polished along with all the piping. I welded on the Tial BOV so it comes with the sale. I used all Samco couplers and the VERY expensive spring-loaded clamps (Approx. 20-25 a piece!!). The piping was slightly modified to accomodate a single-turbo set-up, but I have additional piping and couplers I will include with the sale: $1400 + shipping




5.~~PowerFC w/out Commander: Great condition with a Steve Kan single-turbo map on it: $550 + shipping



6.~~PowerFC with Commander + Commander Holder: Great condition: $800 + shipping



7.~~Greddy Profec Type S: Less than 500 miles of usage and includes all wiring necessary for installation. It's in excellent condition: $275 + shipping



8.~~POLISHED Garrett T66 COMPLETE Single-Turbo Kit: I'm selling a COMPLETE Garrett T66 (Non-Ball Bearing) Single Turbo Kit. Kit was purchased from GothamRacing, has less than 6000 total miles of driving on turbo and all accessories, and everything is in great working condition! I made approximately 450rwhp with this set-up at 15lbs of boost. Full spool occurs at around 4500rpm and will probably be faster with a larger ported motor. Here's what's included:


Turbo Kit: $2000 + Shipping!

• POLISHED Garrett T-66 Single Turbo (Compressor A/R .55; Turbine A/R .96 with a 3" inlet)
• Ceramic Coated Turbine Housing and Exhaust Manifold (Custom "South Florida Performance" Exhaust Manifold: It's a T4 Manifold and I believe it's dumped to atmosphere)
• Tial 38mm External Wastegate
• Ceramic Coated Downpipe w/O2 Sensor (Is ceramic coated, includes a working O2 sensor, and has a V-band Flange.
• Modified Greddy Intake Kit
• K & N Custom 4" Intake with coupler ($100 option)




9.~~Custom Hi-Flow Cat: $80 + shipping



12.~~Custom 3" Exhaust: $80 + shipping



13.~~Autometer Oil pressure Gauge: $25 + shipping



14.~~SPI Boost Gauge (Black-face/white-lettering boost gauge. Great working condition. No pod included): $30 + shipping



15.~~Brand New Custom Intake Kit (Comes with polished piping, two new intakes, and couplers/clamps): $90 + shipping

http://i65.photobucket.com/albums/h2...d/DSC03734.jpg



16.~~4" Generic Filter: $10 + shipping



14.~~'99 Efini Y-pipe w/cross-over: Selling a good condition '99 lightly polished y-pipe w/cross-over and another lil' pipe. I don't have any gaskets/o-rings: $185 + shipping








**Stock Items:: Engine**





1.~~’94 MINT Rebuilt Transmission: Complete rebuild with less than 1000 miles on the components and in excellent condition. The transmission was rebuilt by Cam at Pettit. It has a reduced fifth. It had royal purple in it before it was drained: $750 + shipping

http://i65.photobucket.com/albums/h2...d/DSC03642.jpg
http://i65.photobucket.com/albums/h2...d/DSC03646.jpg
http://i65.photobucket.com/albums/h2...d/DSC03648.jpg




2.~~94 Complete Sunroof Assembly: This is a complete sunroof assembly which includes the sunroof itself, track, motor, all wiring, and a new condition tan sunroof lining and basically new rubber seals: $300 + shipping



3.~~Low Mileage Alternator (Less than 5000 miles): $125 + shipping



4.~~Single-turbo Engine Harness w/30xxx miles: $350 + shipping



5.~~Main Engine Harness w/45xxx miles: $350 + shipping



6.~~'94 Stock Intercooler with Ducting: $125 + shipping

http://i65.photobucket.com/albums/h2...d/DSC03613.jpg
http://i65.photobucket.com/albums/h2...d/DSC03614.jpg
http://i65.photobucket.com/albums/h2...d/DSC03615.jpg



7.~~Power Plant Frame (PPF): $40 + shipping


8.~~Manual Starter: $50 + shipping


9.~~OMP: $40 + shipping


10.~~TPS: $40 + shipping


11.~~Coils ONLY: $45 + shipping


12.~~COMPLETE Power Steering Assembly: $150 + shipping


13.~~Box FULL of Parts (I packed up a box full of stock and aftermarket parts and would like to sell it whole. Everything is in good working condition except for the fuel pump, which I don't know the condition of.): $125 + shipping

Here's a list of the parts I can describe:


- Waterpump Housing
- Waterpump
- Stock turbo piping
- Idle Speed Control
- Cruise Control Module
- Non-sequential Manifold
- Heat Shields for Manifold
- Miscellaneous couplers and clamps
- Couple oil cooler lines
- Vacuum Box
- Fuel Pump (Unknown Condition!)
- Various nuts/bolts, hoses and solenoids
- LOT more parts that I can't describe, but will be included




14.~~Map Sensor: $35 + shipping