Rotary Car Club - FS: Megasquirt W/Wiring harness

Rotary Car Club (https://rotarycarclub.com/index.php)

- 2nd Gen RX-7 Engine Parts (https://rotarycarclub.com/forumdisplay.php?f=12)

- - FS: Megasquirt W/Wiring harness (https://rotarycarclub.com/showthread.php?t=5254)

FS: Megasquirt W/Wiring harness

I have a Megasquirt v2.2(I think) that I need to get rid of. There is nothing wrong with it or the wiring harness, I'm just going a different route for my fc. It has launch control built in, comes with a full wiring harness(w/injector clips), and a modified cas. I will also throw in a serial cable for tuning. It already has a base map for a S4 TII on it.

I'm asking $325 shipped for all of it.

so it is setup for fuel AND spark?

By modified CAS, do you mean that you ground off two opposing teeth on the main wheel? Or that it's modified to wire to the megasquirt and uses both wheels correctly?

Does it have the igniters in the case, or does it use the ones in the stock FC coilpacks?

What firmware version were you running?

And finally: any pics of the harness?

Quote:

Originally Posted by Low Impedance (Post 58891)

so it is setup for fuel AND spark?

Yes

Quote:

Originally Posted by RotaryProphet (Post 59021)

The two opposing teeth are cut off. I didn't do it, I bought the setup from another person. It doesn't have igniters, it uses the stock coilpacks.

I don't know, I'd have to ask the guy that I bought it from. I know the board is PCB2.2

I'll get some pictures of it soon, hopefully tomorrow afternoon.

Im interested in it. Pictures would help me.

What turbo was it setup for? Stock? Hybrid? Or something else?