Need a T2 Front Iron/How to grind out diffuser
 

I need 1 T2 front iron, the motor it's going on is all S5 stuff except the rear iron, but I don't think it matters too much as long as it hasn't been bridged, it's going in a street port motor. One i had got cut a little too deep.

Also, what should I do to grind out a diffuser(n/a housing)? Can i use an electric drill? What kind of bit should i use?

Your problem is not that nobody has a TII front Iron, but that nobody is willing to part with a good stock front iron. I have one also, but it is being reserved for my next porting project. I would guess that many others are in the same boat.

You may do well to check eBay, there are frequently front irons going for good prices on there.

Hey I have one it is a s4 let me know

sorry i've been away, i found one locally for $50 in pretty good shape. Also chris ludwig of ludwig motorsports took my pins out to remove the sleeves to swap them out with the bad t2 housing i have, much thanks to him for this.