does anyone know how to pull the side ducts out?
 

i have an fd and i don't want to mess anything up, so does anyone know the correct way to get these side ducts off the front fenders....thanks for your help...

If you've never done it before and don't want to break them, just take your fender off and then you can see how they are held on.

-J

Just had mine off. The fender has to come off to get them off.

They are held in by plastic clips. The only real way to get them off is to remove the fender. You can try reaching in after removing the inner wheel liner. But is much more difficult.

Here you go:
http://i240.photobucket.com/albums/f...a/Vents004.jpg
http://i240.photobucket.com/albums/f...a/Vents003.jpg
http://i240.photobucket.com/albums/f...a/Vents002.jpg

The big clip faces to front. Plastic clips can/do break. I pulled mine off (back and out), but did break at least one

thanks for the info...ppritchard

Also, removing the fender is actually pretty easy.

Removing the fender liner is actually the hardest part of that job.