Garfinkle Coil Relocation Bracket!
 

I recieved my Garfinkle Coil Relocation bracket today. I requested one to be used with the stock 3rd gen coil. He also offers one for use with the 2nd gen leading coil.

I am impressed once again with Garfinkle's work. Quality is the BEST as always with Garfinkle. The piece is beautiful.


Backside. This side bolts to the chassis under the steering rack.
http://img.photobucket.com/albums/v4...0224091625.jpg

Front side. This side is where the coils bolt to.
http://img.photobucket.com/albums/v4...224091625a.jpg

The bracket mounts to the chassis with threaded inserts.
http://img.photobucket.com/albums/v4...0224091626.jpg

Mock-up with coils.
http://img.photobucket.com/albums/v4...0224091701.jpg

I will update this thread with more pictures as the install progresses.


Included with the bracket was instructions written by Garfinkle. Here's a short excerpt from them.

"The plate was made to mount the coils away from the motor's heat and to shorten the spark plug wires. The place I used for several years was below the steering shaft on the left side of the car."

Check this thread for more pictures:

http://rotarycarclub.com/rotary_foru...ead.php?t=5976

that is very very nice, i will be ordering one of those today!

Both styles are ready to ship

From the grave but don't care this is an awesome product!

Here is where I installed mine

http://i858.photobucket.com/albums/a...8/IMAG0108.jpg

Thanks for the post and picture .