ZE v6
 

Hey guys has this swap ever been done? i know the drivetrain would work with this engine but would it be worth doing? i mean how is the after market and so forth?

ZE is which engine? I'm wanting to think 350z? If so, I saw an FD in a mag with the swap done a while back.

Mazda MX-6 V6

sorry should have said that but yea the mx-6 v6

Wouldn't be worth the trouble. That engine is VERY much designed to be FWD.

Better options if you wanted to keep it Mazda are:
-MS Miata engine
-FE3
-F2T

All of which are 4 cylinder, only the MS and F2 are boosted, and the F2 is only SOHC.

In other words, its cheaper to make power with a rotary.

thanks i was just wonder if its been done

i was debating doing an f2t in my fb. has anyone done this?
(i have searched)

Not in an FC that I am aware of, but in B-series truck it has been done many times.

For RWD configuration you would need:
-B2200 trans, clutch, flywheel, starter
-custom mounts

To run it you would need:
-EDIS conversion (trigger wheel based ignition)
-custom flange to swap the intake around (it faces the firewall, the intake is 2-piece, so this is not as hard as it sounds)
-thermostat housing from a 323 (stock thermostat housing will hit the firewall)
-Megasquirt or similar stand alone ECU

To make power you need:
-FMIC
-hybrid turbo (For T-bird turbo)
-550cc injectors (FC injectors are direct swap)
-Custom exhaust

If you want to do it, I suggest you buy my '89 626 Turbo as a starting point :)

wow that was a no B.S. parts list! you a really knowledgeable person. i'm going to have to start reconsider this swap again lol.

I do what I can. It also helps to have both cars in your driveway.

haha true, all i have to work with is s stroll through pic a part

i seen a miata with the ZE V6 before not sure what tranny he ran though.

the SHO ford/yamaha V6 will bolt up to a T5 with a Bellhousing from a mazda B3000

put it in a miata, stay away from rx7s.